Hydraulically operated proportioning pump FPP series The Fluid Powered Proportioning Pump FPP series, developed by Fluid-o-Tech®, is designed to mix two different fluids with a high degree of accuracy. The pump operates thanks to the energy stored in any pressurized fluid, which gives power to the unit. The mixing ratio, determined by the dimensions of the two chambers, is constant regardless of the flow rate and pressure requested by the application. The food grade materials used in the pump have a high degree of compatibility. Manufacturing characteristics • Anti-stall valve to grant operations under every condition • Sanitary design • Wet materials: Polybutylene Terephalate, EPDM, 316 Stainless Steel, Polyethylene • Fittings: JG 5/16” water inlet, JG 3/8” other ports MAIN APPLICATIONS • Post-mix dispensers • Fertilizer mixing • Sanitation equipment • Food equipment • Chemical dosing Patented TECHNICAL INFORMATION Mixing ratio Mixing ratio accuracy Recommended flow rate Weight Max. inlet working pressure Working temperature Suction lift wet Fluid delivered Dimensions in mm [inches] Note: For applications involving other fluids, high temperatures or unusual processing conditions, please consult the factory or an authorized Fluid-o-Tech distributor. Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy Tel. +39 02 9995 01 Fax +39 02 9995 0999 [email protected] Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville CT (USA) Tel. +1 (860) 276 9270 Fax +1 (860) 620 0193 [email protected] Fluid-o-Tech Asia