Magnet drive gear pumps PG300 series There are applications where the liquids involved are very difficult to handle and working solutions are hard to find and require a great financial investment. The PG300 series is Fluid-o-Tech®’s reply to such requirements. Made to give the same high level of performance as the MG300 series, the PG300 series pumps are built in a special grade of PPS to offer the greatest versatility and quality of material while allowing for exceptional mechanical characteristics. The gears are available in Peek and PTFE. The elastomers are available in a comprehensive range of materials to allow usage in the widest variety of applications. The PG300 series offers mag drive coupling with ferrite or rare earths magnets. Available upon request: • Built-in relief valve • Rare earths driven magnet MAIN APPLICATIONS • Medical and surgical equipment • Cooling systems • Hemodialysis apparatus • Laboratory instrumentation • Laser apparatus • Water treatment • Ink-Jet printing systems • Food processing equipment TECHNICAL INFORMATION Max static pressure Peek /PTFE Temperature range Wet lift with water* Speed limit Max instantaneous gradient of fluid 45°C/113°F Pump housing material Gears and bushing materials * Priming ability varies with operating conditions and fluid characteristics 72 [2.8346]

Operating range with ferrite driving magnet Operating range with rare earth driving magnet Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use filter before pump inlet not larger than 10 micron. A = 1 Different B A 201cSt = = availableB= 75request. Cupon cSt = 20 cSt Temperature requirements different from ambient temperature must be mentioned on the order.cSt materialscSt

Magnet drive gear pumps PG300 series Operating range with ferrite driving magnet Operating range with rare earth driving magnet Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use filter before pump inlet not larger than 10 micron. D E Temperature requirements different from ambient temperature must be mentioned on the order. Different materials available upon request. == 200 cSt 160 cSt E = 200 cSt

MODEL NUMBER MATRIX Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Fluid-o-Tech srl Fluid-o-Tech Int'l Inc. Fluid-o-Tech Int'l Inc. Japan Fluid-o-Tech Asia (Beijing) Co., Ltd Via Leonardo da Vinci, 40 161 Atwater St., 203, 2-17-19, Ebara, Shinagawa Jingwei Industrial Zone, 20094 Corsico, Milano, Italy 06479 Plantsville CT (USA) Tokyo 142-0063, Japan Beifang Huairou, Beijing, 101400, PRC [email protected] [email protected] [email protected] [email protected]