Magnet drive gear pump-motor units MGCF03S/MGCF07S/MGCF28S series The compact precision performance pumps MG or PG series are designed to fit high technology applications. The magnet drive principle provides a totally sealed pump chamber which is capable of handling a wide range of corrosive fluids with a high degree of safety. The pump housing is available in AISI 303, AISI 316L, SAF 2205 or PPS. In operation the MG or PG series pumps are noiseless, pulsation-free and capable of handling relatively high temperature liquids up to 120 °C (248 F). The coupling with the MGCF03S, MGCF07S and MGCF28S units designed for heavy duty, provides a reliable and noiseless operation in a compact size package. The pole-to-pole alignment of the two magnets provides the driving motion to the pump. Decoupling will occur when the pump load exceeds the maximum coupling torque provided by the alignment of the two magnets. MAIN APPLICATIONS • Medical and surgical equipment • Cooling systems • Hemodialysis apparatus • Water treatment • Laser apparatus • Food processing equipment • Laboratory instrumentation • Ink-jet printing systems Dimensions in mm [inches] www.fluidotech.com

Magnet drive gear pump-motor units MGCF03S/MGCF07S/MGCF28S series Ferrite driving magnet Complete adapter Complete motor assembly DRIVING UNIT Flow rate Flow rate Note: Characteristics with water at 20 °C (68 F) and without relief valve, max vacuum 724 mmHg. Use filter before pump inlet not larger than 10 micron. Unit weight: 3.7 kg (8.1 Lbs). Temperature requirements different from ambient temperature must be mentioned on the order. Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Via Leonardo da Vinci, 40 20094 Corsico,...