Magnet drive gear pumps MG200/MG400 series The MG series magnet drive gear pumps are compact precision performance pumps for high technology applications. The magnet drive principle provides a totally sealed pump chamber capable of handling a wide range of corrosive liquids with a high degree of safety. The housing of the pump and the internal metal parts are in AISI 316L stainless steel and the gears are available in Peek™, Ceramic Peek™ or PTFE™. In operation the MG series pumps are noiseless, pulsation-free and able to handle relatively high temperature fluids with low coefficient of expansion. The principle of the magnetic drive compries an inner magnet embodied in the pump and connected to the driving gear, and an outer magnet connected to the motor shaft. The pole-to-pole alignment of the two magnets provides the driving motion to the pump. Decoupling will occur when the pump load exceeds the maximum coupling torque provided by the alignment of the two magnets. Available upon request: • Built-in relief valve • Rare earths driven magnet MAIN APPLICATIONS • Medical and surgical equipment • Cooling systems • Hemodialysis apparatus • Laboratory instrumentation • Laser apparatus • Water treatment • Ink-Jet printing systems • Food processing equipment TECHNICAL INFORMATION Pump housing material Stainless steel Gears and bushing materials Peek /Ceramic Peek /PTFE Speed limit *Wet lift with water Temperature range * Priming ability varies with operating conditions and fluid characteristics Ø 56 [Ø 2.2047] Dimensions in mm [inches] www.fluidotech.com

Operating range with ferrite driving magnet Operating range with rare earth driving magnet Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use filter before pump inlet not larger than 10 micron. A = 1 Different B A 201cSt = = availableB= 75request. Cupon cSt = 20 cSt Temperature requirements different from ambient temperature must be mentioned on the order.cSt materialscSt

Magnet drive gear pumps MG200/MG400 series Operating range with rare earth driving magnet Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use filter before pump inlet not larger than 10 micron. D E Temperature requirements different from ambient temperature must be mentioned on the order. Different materials available upon request. == 200 cSt 160 cSt E = 200 cSt

MODEL NUMBER MATRIX Other materials available upon request Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Fluid-o-Tech srl Fluid-o-Tech Int'l Inc. Fluid-o-Tech Int'l Inc. Japan Fluid-o-Tech Asia (Beijing) Co., Ltd Via Leonardo da Vinci, 40 161 Atwater St., 203, 2-17-19, Ebara, Shinagawa Jingwei Industrial Zone, 20094 Corsico, Milano, Italy 06479 Plantsville CT (USA) Tokyo 142-0063, Japan Beifang Huairou, Beijing, 101400, PRC [email protected] [email protected] [email protected] [email protected]