Fluid-o-Tech magnetic drive rotary vane pumps TM series
1 / 2Pages

Fluid-o-Tech magnetic drive rotary vane pumps TM series 93-103 29 38 3/8"GAS 3/8"NPT 88 21.5 45 80 Ø 78 45 Ø 69.5+0.000 – 0.046 3/8"NPT 88 29 38 3/8"GAS 88 21.5 45 80 Ø 78 45 Ø 69.5 +0.000 –0.046 The Fluid-o-Tech magnetic drive rotary vane pumps combine the established range of pumps with the added advantage of an indirect magnetic coupling: • longer service life • no mechanical seals • totally sealed body • low maintenance • less power consumption • smooth transmission The principle of the magnetic drive comprises an inner magnet embodied in the pump and connected to the rotor, and an outer magnet connected to the motor shaft. The pole-to-pole alignment of the two magnets provides the driving motion to the pump. Decoupling occurs when the pump load exceeds the coupling torque between the magnets. The introduction of a new driving magnet with improved torque (available upon request) brings the maximum operating pressure to the same values of the PO series with direct coupling. The Rotoflow TM series magnetic drive rotary vane pumps are available in stainless steel AISI 303 or brass, with carbon graphite internal components. Available upon request: - 3/8" GAS or NPT threaded ports - standard or balanced relief valve - NBR, EPDM or Viton® seals - NSF listed pumps for potable water (TM...A series) • Max system pressure: 18 bar (260 psi) • Max temperature: 70 °C (158 °F) www.fluidotech.it Dimensions in mm Pump with balanced bypass valve overall dimensions Pump with standard bypass valve overall dimensions Dimensions in mm ®

0 0 10 20 30 40 50 60 50 100 150 200 250 300 FLOW RATE GPH l/h 1450 RPM PRESSURE 70 0 50 100 150 200 0 2 4 6 8 10 12 14 16 BAR 225 PSI A A B B C C D D E E F F Fluid-o-Tech magnetic drive rotary vane pumps TM series Note: Hydraulic characteristics with water at 20 °C (68 °F) and without bypass. Use filter before pump inlet not larger than 10 microns. Pump weight: 1,1 kg (2,4 Lbs). For applications involving other fluids, high temperatures, unusual processing conditions or speed higher than 2500 rpm consult the factory or an authorized distributor. Fluid-o-Tech reserves the right to alter the...