Fluid-o-Tech magnet drive rotary vane pumps TH series

Product catalog summary

Introduction: The Fluid-o-Tech TH series introduces magnet drive rotary vane pumps designed for higher flow rates ranging from 500 to 1000 l/h at 1450 rpm or 160 to 330 GPH at 1725 rpm. These pumps feature magnetic coupling for enhanced performance and longevity.

Key Features:

Longer service life due to the absence of mechanical seals.
Totally sealed body and low maintenance requirements.
Reduced power consumption and smooth transmission.
High performance and alignment ensured by rare earth magnets.

Specifications:

Available housing materials: AISI 303 or brass.
Internal components include AISI 303 rotor and carbon graphite pumping chamber.
Seal options: NBR, EPDM, or Viton®.
Threaded ports: 1/2" GAS or NPT.
Built-in relief valve and NSF listed for potable water.
Maximum speed: 1725 rpm.
Maximum system pressure: 18 bar (260 psi).
Maximum temperature: 70 °C (158 °F).

Performance: The pumps offer efficient operation with low power consumption due to the absence of friction from mechanical seals. They are configurable to meet specific customer needs.

Model Variants: The TH series includes models such as THSS500A to THSS1000A and THOT500A to THOT1001A, with options for standard or stainless steel and brass housings.

Installation and Maintenance: It is recommended to use a filter before the pump inlet not larger than 20 microns. For applications involving other fluids or conditions, consult the factory or an authorized distributor.

Contact Information: Fluid-o-Tech provides contact details for their offices in the USA, Japan, China, and Italy for further inquiries and support.

Catalog excerpts

Fluid-o-Tech magnet drive rotary vane pumps TH series 105.6 39 86.6 62 48 2x1/2" GAS 2x1/2" NPT Ø 70 63 Ø 45.7 32 Ø 78 0 –0.1 Ø 69.5 0 –0.046 2.5 114.6 Ø 70 63 105.6 39 86.6 114.6 32 48 2.5 63 Ø 45.7 Ø 78 0 –0.1 Ø 69.5 0 –0.046 2x1/2" GAS 2x1/2" NPT The Fluid-o-Tech magnetic drive rotary vane pumps range widens with the introduction of the TH series which combines the larger flow rate (500 to 1000 l/h at 1450 rpm or 160 to 330 GPH at 1725 rpm) with the added benefit of the magnetic coupling: • longer service life • no mechanical seal • totally sealed body • low maintenance • less power consumption • smooth transmission The rare earths magnet grants high performance and perfect alignment between the pump and the motor, extending the life of the unit. The absence of friction, usually caused by the rotation of the mechanical seal against the ceramic seat, allows a more efficient operation and therefore a low power consumption. The Rotoflow TH series pumps offer multiple options to configure the product to the specific need of each customer. The housing is available in AISI 303 or brass. The internal components include AISI 303 rotor, carbon graphite pumping chamber and a choice of NBR, EPDM or Viton® seals. • 1/2" GAS or NPT threaded ports • Built-in relief valve • NSF listed pumps available for potable water • Max speed: 1725 rpm • Max system pressure: 18 bar (260 psi) • Max temperature: 70 °C (158 °F) www.fluidotech.it Dimensions in mm Dimensions in mm ®

Open the catalog to page 1

Fluid-o-Tech magnet drive rotary vane pumps TH series-2

0 1150 1050 950 850 750 650 550 450 GPH l/h FLOW RATE 1 2 20 PSI 3 4 5 6 7 8 9 10 11 12 13 14 15 16 BAR PRESSURE 0 40 60 80 100 120 140 160 180 200 220 120 300 280 260 240 220 200 180 160 140 F F E E D D C C B B A A 1450 RPM Fluid-o-Tech magnet drive rotary vane pumps TH series Note: Characteristics with water at 20 °C and without bypass - Use filter before pump inlet not larger than 20 microns - Pump weight: 2,1 kg (4,6 Lbs). For applications involving other fluids, high temperatures, unusual processing conditions or speed higher than 1725 rpm consult the factory or an authorized Fluid-o-Tech...

Open the catalog to page 2