FG200-FG300 SERIES
1 / 2Pages

Magnet drive gear pump-motor units FG200/FG300 series The Fluid-o-Tech® FG series combines a 24V brushless DC drive motor in a rotor-less configuration with a high precision mag drive MG or PG series gear pump to deliver a high end system capable of handling fluids in the most demanding applications. The service life of the unit, due to fewer moving parts and to the excellent balance of the system, is greatly extended compared to the traditional pump-motor units. The integration of the pump, motor and variable speed controller provides an electromagnetically coupled, leak free fluidic system with a high degree of versatility. The extreme accuracy of the design and of the finishing allows the unit to deliver a smooth and pulsation free flow in all conditions. Different materials are available for a wide array of fluids. MAIN APPLICATIONS • Medical equipment • Cooling systems • Hemodialysis apparatus • Laboratory instrumentation • Laser apparatus • Water treatment • Ink-Jet printing systems • Food processing equipment TECHNICAL INFORMATION Pump housing material Gears and bushing material Ports Max static pressure Max vacuum Wet lift with water* AISI 316L or PPS Peek/PTFE 1/8” GAS or NPT 20 bar/290 psi 724 mmHg/28.5 inHg ~ 8 m/26.2 ft Motor type Speed range Max output power Motor IP protection Insulation class Unit weight 24 V BLDC from 500 to 5000 rpm 50 W IP 52 F AISI 316L 910g/2lb - PPS 550g/1.2lb * Priming ability varies with operating conditions and fluid characteristics OPERATING RANGE Max ambient temperature Fluid temperature Max torque Min ambient temperature Dimensions in mm [inches] www.fluidotech.com

Magnet drive gear pump-motor units FG200/FG300 series Flow Power Flow Power FG200-FG300 with 13 mm gears (0.9 ml/rev) FG200-FG300 with 9 mm gears (0.6 ml/rev) Absorbed power [Watt] Absorbed power [Watt] Absorbed power [Watt] FG200-FG300 with 4 mm gears (0.3 ml/rev) Note: Characteristics with water at 20 °C (68 F) and without relief valve. Use a filter before the pump inlet no larger than 10 micron. Temperature requirements different from ambient temperature must be mentioned on the order. Different materials are available upon request. Fluid-o-Tech reserves the right to alter the...