Metering systems DSS-01 and DSX-01 Find out more Fluid-o-Tech®’s metering systems are highly accurate driving systems designed for Fluid-o-Tech® magnet drive gear pumps for dispensing liquids with flow rates ranging from 90 ml to 3600 ml/min. The driver is a 24 V DC brushless motor closed loop controlled by Application Specific Integrated Circuit (ASIC) granting high efficiency, silent operation and long service life. Different pump heads series (MG200 - MG300 - PG300) with different gear width can be mounted on the unit. Main features • Pulseless pumping • Dispense function by volume, time and cycle time • Interchangeable Fluid-o-Tech® pump heads • Pre-programmable* • DC brushless motor assures high output torque, high efficiency, maintenance free and silent operation • 128 x 32 LCD screen (Four digits LED to display speed information on DSS unit) • Closed loop for dispensing accuracy control* • Fast purge function • Quick start/stop • Pc controllable unit • Power-fail memory function MAIN APPLICATION • Delivery and dispensing processes for particulate-free solutions MODEL (GEAR WIDTH) FLOW RATE TECHNICAL INFORMATION Flow range Motor speed Motor speed control accuracy Dispensing accuracy control* Speed control Communication mode Power supply Power consumption Cooling Working environment** Motor IP protection Weight (without pump head) Size (without pump head) * Available only on DSX series ** Relative humidity < 90% (non condensing) Dimensions in mm [inches] Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy Tel. +39 02 9995 01 Fax +39 02 9995 0999 [email protected] Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville CT (USA) Tel. +1 (860) 276 9270 Fax +1 (860) 620 0193 [email protected] Fluid-o-Tech Asia