Magnet drive gear pump-motor units DGM09 series The DGM09 series magnet drive gear pumps derive from the well established mag drive MG200 series. Built to handle clean water and relatively viscous fluids at low pressure, the DGM09 series pump-motor unit has low pulsation and is capable of handling fluids at a maximum temperature of 95 °C (203 F). The pump housing and the gears are made of Vectra. Seals are available in NBR, EPDM or VITON®. The seal less design is guarantee of reliability. Suction/discharge ports are 8 mm barbed end. • Motor: 12-24 V DC, 3000 rpm, brush type MAIN APPLICATIONS • Water purification • Water recirculation • Laser cooling • Condensation removal MODEL NUMBER MATRIX DESCRIPTION Pump series Gears width thickness Elastic material DGM = magnet drive 09 = 9 mm E = EPDM N = NBR V = VITON® 000 = none M01 = 3000 rpm/24V M03 = 3000 rpm/12V * Dimensions without motor and adapter

Magnet drive gear pump-motor units DGM09 series Note: Characteristics with water at 20 °C (68 F), 24V DC motor. Weight: 0.90 kg (1.98 Lbs). For applications involving other fluids, high temperatures or unusual processing conditions, please consult the factory or an authorized Fluid-o-Tech distributor. Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy Tel. +39 02 9995 01 Fax +39 02 9995 0999 [email protected] Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville...