Direct drive gear pump-motor units DGD09 series The DGD09 series direct drive gear pumps derive from the well established mag drive MG200 series. Built to handle clean water and relatively viscous fluids at low pressure, the DGD09 series pump-motor unit has low pulsation and is capable of handling fluids at a maximum temperature of 70 °C (158 F). The extreme compactness of its design makes it the preferred choice where space is limited. Suction/discharge ports are 8 mm barbed end. Motor version (brush type): • 1550 rpm, 24 V DC • 3200 rpm, 24 V DC • 3900 rpm, 24 V DC MAIN APPLICATIONS • Water purification • Syrup dispensing • Laser cooling • Vending machines • Food processing • Water recirculation • Digital macro printing • Condensation removal MODEL NUMBER MATRIX POS Pump series Gears width* Elastic material * 4 mm gears version available upon request DGD = direct drive 09 = 9 mm N = NBR V = VITON® A01 = 1550 rpm A02 = 3200 rpm

Direct drive gear pump-motor units DGD09 series Note: Characteristics with water at 20 °C (68 F). Weight: 0.34 kg (0.74 Lb). For applications involving other fluids, high temperatures or unusual processing conditions, please consult the factory or an authorized Fluid-o-Tech distributor. Fluid-o-Tech reserves the right to alter the specifications indicated in this catalogue at any time and without prior notice. Via Leonardo da Vinci, 40 20094 Corsico, Milano, Italy Tel. +39 02 9995 01 Fax +39 02 9995 0999 [email protected] Fluid-o-Tech Int’l Inc. 161 Atwater St., 06479 Plantsville CT (USA) Tel....