Pneumatic stirrer PML
2Pages

Fluid Kotthoff GmbH Mixing Technology Pneumatic stirrer PML The pneumatic stirrer PML is prefered for aquaous media. Stirrer design FLUKO pneumatic stirres are designed for areas where non-electrical equipment is desired. The stirres are compact and in most cases lighter than the corresponding electric equivalent. The stirres consists of: Compressed air motor Bearing housing Stirrer shaft Stirring device Drives The PML stirrer uses an air motor. FLUKO pneumatic stirrers are available in 3 sizes from 0.4 to 2.0 kW at the nominal speeds. The speed is continously adjustable by throttling the air. Pneumatic stirrers can be configured for use in explosion-risk areas. Pneumatic stirrer with beariing housing and seperate mounting of the stirring shaft. 2,4 and 6 with double shaft mounting. 2K and 4K with single shaft mounting. ATEX configuration: II 2GcT4 Stirrer devices Standard – replaceable 3 blade propeller with threaded or friction screw connection. Alternative – dispersing disc, or 3 or 4 blade hinged propeller for use with drums. Stirring devices in AISI 316Ti stainless steel. Pneumatic stirrer PML with 4 blade folding propeller Materials Stirring shaft and stirring device in AISI 316Ti stainless steel. dispersing disc Pneumatic stirrer PML Page 1 of 2 Daniel-Eckhardt-Str. 44 · D-45356 Essen Telephone +49 (0)2 01 8 35 73-0 · Fax -20 Fluid Kotthoff GmbH info@fluid-kotthoff.de · www.fluid-kotthoff.de

Fluid Kotthoff GmbH Mixing Technology Stirrer clamps PMLF PMLC PMLK PMLE with container thread for 2" bunghole containers with container lid for refillable containers with clamp for open containers with mounting flange as stationary stirrer - a = 120 mm; e = 105 mm; 4 x Ø 7 mm - a = 160 mm; e = 130 mm; 4 x Ø 9 mm Pneumatic stirrer PML Page 2 of 2 Daniel-Eckhardt-Str. 44 · D-45356 Essen Telephone +49 (0)2 01 8 35 73-0 · Fax -20 Fluid Kotthoff GmbH info@fluid-kotthoff.de · www.fluid-kotthoff.de