INI FLOW METER AND SEN TECHNICAL DATASHEET MATERIAL OF CONSTRUCTION :-Enclosure : S.S-304/S.S-316 Rotor : S.S-304 Shaft : Hard Stainless Steel-316 with carbon bush Accuracy (standard installation position): +/- 0.5 OR 1% FSD Repeatability: 0.1% Maximum working Pressure: 6 MPa Fluid & Ambient Temperature: -20° C to 120° C Connection: Threaded (M/F) OR Flanged PULSE OUTPUT SENSOR :-Power voltage : 12 V DC Output signal : NPN open connector High electric level : Higher than 8 V DC (input voltage 12 VDC) Low electric level : Lower than 0.8 V DC (input voltage 12 VDC) BATTERY OPERATED METER :- Power voltage : 3.3 V10AH lithium batteries can be used more than 5 years in a row. Display mode : Double row Liquid Crystal Display (LCD), as follows: L XXX. X four instantaneous flow (M3/Hr) or L/h XX. XXXXXX eight cumulative flow (M3) Cumulative flow automatically expand the display precision, The cumulative flow values can be reset. Power-fail protection instrument coefficient, The Total flow values are not lost for ten years when power supply drop.

DISPLAY WITH 4 TO 20 mA OUTPUT :-Power voltage : 24 V DC Output signal : 4 TO 20 mA CAPACITY TABLE Red 5-24 V DC Yellow O/p Signal NPN Open Collector Black 0 V CALIBRATION PROCESS :- Calibrated each flow sensor with three pressure point: 0.5, 4 and 25 Bar. All pressure calculate pulse / litter at: 25%, 50%, 75% and 100% flow rate. Calibrated with pure water at 25° C APPLICATION :-S.S. body and rotor Flow measurements of Pharmaceutical, Drug, Food, Oil, Water and all application

MODEL DECODIFICATION www.flowtech-instruments.com

FLOWTECH MEASURING INSREUMNTS PVT. LTD. AN ISO 9001: 2015 COMPANY Works Tel. Mobile E-mail Website Exporters to : BANGLADESH – DUBAI – EGYPT – FRANCE – INDONESIA – KUWAIT – MALAYSIA – NEPAL – NIGERIA – POLAND – SARJAH – SINGAPORE – SRI LANKA – SOUTH AFRICA – THAILAND Local Dealers : AHMEDABAD – ANKLESHWAR – BHOPAL – CHENNAI – GANDHIDHAM HYDERABAD – INDORE – MUMBAI NOTE : DOING ONLINE CALIBRATION OF FLOWMETER SIZE 40 NB TO 300 NB THROUGH HIGH ACCURA