Catalogs >
FLOWSERVE >
PMV D3 Digital Positioner Brochure

PMV D3 Digital Positioner Brochure
8Pages

Catalog excerpts

D3 Digital Positioner General > The D3 is a digital valve positioner with exceptional features and benefi ts.The computer-optimised pneumatic relay with piezo-electric valves offers great dynamic perfor- mance together with very low steady state air consumption. All information is presented on a large graphic display and con fi gu ra tion is simple from fi ve large push buttons or via HART and Profi bus PA communication.The combination of these features result in lower energy consumption and considerable savings, while maintaining a high degree of valve performance. IP66/NEMA 4X > The...

Open the catalog to page 2

The D3 is available in an intrinsically safe version for installation in ha-zardous areas. It features the same easy to use user interface for local confi guration as D3. Communication with HART > or Profi bus PA is possible. It features all benefi ts and options similar to the Standard D3 positioner, gauge block, local graphic LCD display and feedback option etc. > The digital positioner D3 is available in explosion proof enclosure. It features the same easy to use user interface for local confi guration as D3. Communication via HART > ή or Profi bus PA is possible.Further features are...

Open the catalog to page 3

Function Direct or Reverse Engineers at PMV have gone to great effort in the design of a simple, easy to understand UI-User Interface. A large graphic display and fi ve keys for confi guration makes the D3 simple to operate. The menu position indicator shows you how far you are in the menu structure. All information is presented clearly in text form in the display. The display itself is visible with cover installed. If the positioner is mounted upside down the display can be ֔fl ipped. The menu offers you the possibility to simply set or change, among other things, the following parameters;...

Open the catalog to page 4

D3 Digital Positioner > The menu structure is divided into two parts: Basic menuӔ and Full menuӔ.The Basic MenuӔ offers you what is needed for set up and auto calibration while the Full MenuӔ provides the possibility for further adjustments of the control parameters or set alarms. When installed on an actuator, simply run the auto calibration procedure, and the D3 will set and optimize the control parameters for best dynamic performance. The friction clutch for the feedback sensor ensures that the feedback element is always in the correct position.The keyboard can be locked to prevent...

Open the catalog to page 5

D3 is available with HART > and Profi bus PA protocol for bi-directional communication, enabling remote confi guration and initialisation from PC or a HART > ή communicator. Drivers are available for AMS software. > Intrinsically safe: ATEX EEX ia IIC T4 II 1 G DCSA, FM Div.1, Class 1 Group C,D, Class II Group E,F,G, Class III Explosion proof: ATEX EEX d IIB+H > 2 , T6 II 2 G DDiv.1, Class 1 Group B,C,D, Class II Group E,F,G, Class III For use with natural Gas D3E. CL. 1 DIV. 1C. D T5 Certifi ed: CSA C22.2 No 30.142 >

Open the catalog to page 6

Alarm Supply Voltage 828V Mechanical Switches Type SPDT Size Sub Sub miniature Rating 100mA/30VDC/42VAC Namur Sensors Type Proximity DIN 19234 NAMUR Load Current < > Rotation angle min. 30ְ max. 100Stroke 5Ж130 mm (0.2" to 5.1") Input signal 420mA Air supply 2֖7 bar (30105 psi) Free from oil, water & moisture, fi ltered to min. 30 micron.Air delivery 400 nl/min (13.8 scfm) Air consumption <0.3 nl/min (0.01 scfm) Air connections 1/4" G or NPT Cable entry 3 x M20 x 1.5 or 1/2" NPT Electrical connections Screw terminals 2.5 mmֲ/AWG14 Linearity <1% Repeatability <0.5% Hysteresis <0.4% Dead band...

Open the catalog to page 7

Mark your choice 1. Model D3X Digital positioner with display D3I Digital positioner with display, Intrinsically safe D3E Digital positioner with display. explosion proof2. Connections G 1/4" G Air, M20 x 1.5 electrical N 1/4" NPT Air, " NPT 3. Surface treatment U Powder epoxy4. Function S Single acting D Double acting C Single acting, remote mounted R Double acting, remote mounted5. Spindle 01 S01ݖS396. Cover and indicator PVA Standard PMV, 90 deg, arrow indicator* PVB Extended travel, max 270 deg7. Temperature/seals Z NBR 30 to 80 deg C (֖22 to 176 deg F)8. Input signal/protocols 4 420 mA...

Open the catalog to page 8