Pipeline Transportation Pumps Crude Oil and Refined Products • Water • Slurry

The Trusted Partner in Global Pipeline Pumping Flowserve offers innovative pumping solutions for every conceivable pipeline application, including oil, refined products, carbon dioxide (CO2) liquid gases, water and slurry services. With more than 200 years of industrial pump experience and 100 years of pipeline pumping experience, Flowserve has earned a pre-eminent position in the industry through advanced design, engineered solutions, equipment re-rates and customer service excellence. Case Study: Hydraulic Re-rate Installation: DVS single-stage, double-suction horizontal split case pumps on...

A Complete Range of Pipeline Pumps Crude Oil and Refined Product Pipeline Pumps Mainline/Booster Pumps • Single- and two-stage between bearings • Multistage, horizontal split case • Multistage, radially split double case • Multistage vertical canned • Twin screw multiphase Auxiliary Pumps • Single-stage overhung • Vertical in-line • Submersible motor • Single-stage and multistage vertical wet pit • Single-stage and multistage vertical canned • Service-specific specialty designs CO2 Pipeline Pumps • Single-stage, between bearings, radially split • Multistage, horizontal split case • Multistage,...

Heritage Names of Distinction Byron Jackson ® IDP ® Pacific ® Pleuger ® United Centrifugal ® Worthington ® Crude Oil and Refined Product Pipeline Systems Flowserve is the industry’s preferred supplier of petroleum product pipeline pumps. Reliability makes Flowserve pumps the products of choice for unattended mainline operation in some of the world’s most inhospitable environments. No other manufacturer offers a comparable breadth of products and services for transportation, transfer, storage and cargo stripping. Flowserve has reliable and cost-effective solutions for the most demanding upstream...

Diluent/Bitumen, Froth Transfer and Synthetic Crude Pipelines Products Cavern and Well Storage Transfer Terminals Flowserve pumps are especially suited to the unique requirements of diluent/bitumen service for steamassisted gravity drainage (SAGD). Through extensive knowledge of heat tracing and variable speed operation along with close working relationships with Flowserve seal experts and other mechanical seal suppliers, Flowserve pumps are custom-designed to suit each application. Typical models for this service include vertical canned and horizontal single- and multistage split case pumps....

From the Producing Fields to the Market, Flowserve Has the Pipeline Pump Solution DVSH/LPN/LPLD (BB1) 1 Axially Split, Single-Stage 4 Axially Split, Multistage 2 Axially Split, Two-Stage 5 Multistage, Diffuser Collector, Barrel Casing, Volute Collector 6 HDO/HSO (BB5) Casing, Process Barrel Multistage, Volute DVSR (BB2) Radially Split, Double-Suction, Single-Stage

VPC (VS6) 8 Vertical Turbine, Double-Casing ALT. WUC (VS6) Double-Casing Multistage SUBM – Deep-Well Submersible 9 (Pleuger water-filled) (Byron Jackson oil-filled) 10 ESP3 Immersion Sump Vertical

Most Complete Line of Crude, Petroleum and CO2 Pipeline DVSH/ LPN/LPLD Mainline Pumps – Operating Parameters DVSH/LPN/LPLD (BB1) Axially Split, Single-Stage DMX (BB3) Axially Split, Multistage • Flows to 15 000 m3/h (65 000 gpm) • Heads to 565 m (1854 ft) • Pressures to 150 bar (2175 psi) • Speeds to 6000 rpm • Flows to 2950 m3/h (13 000 gpm) • Heads to 2130 m (7000 ft) • Pressures to 275 bar (4000 psi) • Speeds to 6000 rpm UZDL (BB1) Axially Split, Two-Stage WCC/WIK (BB5) Multistage, Diffuser Collector, Barrel Casing • Flows to 2950 m3/h (13 000 gpm) • Heads to 685 m (2250 ft) • Pressures to...

flowserve.com Byron Jackson SUBM WUJ/VTP WUC/VPC Pleuger SUBM Auxiliary Services Pumps – Operating Parameters HPX (OH2) Centerline Mounted WUC/VPC (VS6) Vertical Turbine, Double Casing • Flows to 2000 m3/h (8800 gpm) • Heads to 350 m (1100 ft) • Pressures to 80 bar (1160 psi) • Flows to 13 600 m3/h (60 000 gpm) • Heads to 2000 m (6560 ft) • Pressures to 200 bar (2900 psi) PVXM (OH3) Vertical In-Line Pleuger SUBM Deep-Well Submersible (Water-Filled Design) • Flows to 500 m3/h (2200 gpm) • Heads to 275 m (900 ft) • Pressures to 40 bar (600 psi) Mark 3 ANSI and ISO • Flows to 4540 m3/h (20 000 gpm)...

Heritage Names of Distinction Byron Jackson ® IDP ® Pleuger ® United Centrifugal ® Worthington ® Worthington Simpson ™ Water Pipeline Systems Flowserve traces its history to the late 1790s when its Simpson heritage brand began applying steam pumping engines to municipal waterworks in the United Kingdom. Today, Flowserve pumps are used extensively in: Case Study: Middle East Pipeline Installation: 22 DMX axially split, two-stage pumps (24 x 28) with driver sizes to 16 780 kW (22 500 hp) delivering 1.6 million bbl/d at heads to 625 m (2050 ft). Casing weights total equal 13 610 kg (30 000 lb)....

Water Pipeline Pump Solutions – Operating Parameters LNN Axially Split, Single-Stage • Flows to 30 000 m /h (132 000 gpm) • Heads to 300 m (980 ft) • Pressures to 40 bar (580 psi) • Flows to 13 600 m3/h (60 000 gpm) • Heads to 700 m (2300 ft) • Sizes from 150 mm (6 in) to 1375 mm (54 in) Pleuger and Byron Jackson SUBM Deep-Well Submersible Motors (Water-Filled or Oil-Filled) • Flows to 340 m /h (1500 gpm) • Heads to 120 m (395 ft) • Pressures to 15 bar (220 psi) 3 F-Line End Suction, Multistage • Flows to 500 m3/h (2200 gpm) • Heads to 250 m (820 ft) • Discharge pressures to 25 bar (365 psi)...

Heritage Names of Distinction IDP ® TKL™ Wilson-Snyder ® Worthington ® Slurry Pipeline Highly abrasive and often corrosive slurry creates an extraordinarily difficult pumping environment. Typical slurry pipeline applications include tailings (waste rock) disposal, extraction plant to concentrator and concentrator or washery to loading terminal. Coal slurry, metal ore slurry and diluent/bitumen froth all present severe corrosive and erosive challenges to high-pressure pumping. Flowserve is unequaled in its materials expertise, offering an extensive selection of metallic and non-metallic solutions....