Catalogs >
FLOWSERVE >
D3 Digital Positioner Brochure

D3 Digital Positioner Brochure
8Pages

Catalog excerpts

The D3 is a digital valve positioner with exceptional features and benefits.Its very simple to use and operate due to a large graphic display where all information is presented. Configuration is simply done from five large push buttons.The zero bleed pneumatic relay offers savings due to very low air consumption. Optional plug in modules offers limit switches, both mecha-nical, proximity and P+F inductive, 4Җ20 mA feedback and alarm with output function. Communication via HART, Profibus PA or Foundation Field-bus is possible. For the HART version of D3, a free of charge PC configurator is...

Open the catalog to page 2

The D3 is available in an intrinsically safe version for instal-lation in hazardous areas. It features the same easy to use user interface for local configuration as D3. Communication with HART Optional plug in feedback modules offer limit switch function; select between mechanical or proximity SPDT switches or P+F inductive sensors. A 4-20 mA position feedback sensor is available as well as an alarm function for deviation, limit and tempera- ture. > or Profibus PA is possible. It features all bene-fits and options similar to the Standard D3 positioner, gauge block, local graphic LCD...

Open the catalog to page 3

A large graphic display and five keys make D3 simple to operate. All information is presented clearly in text form in the display. The display itself is visible with cover installed. The menu position indicator shows you how far you are in the menu structure.There are no LEDs, cryptic codes or other non-understan-dable messages on the display.During calibration and initialasation, D3 walks you thru a guide where you set actuator type and function, all you do is to select the proper setting, then simply press OK. D3 will now autocalibrate itself for optimal function. 3.2.1. 7.6.6.5. 8. 4. 1....

Open the catalog to page 4

D3 is available with HART > , Profibus PA and Foundation Fieldbus protocol for bi-directional communication, enabling remote configuration and installation from PC or a handheld communicator. Drivers are available for AMS software.A PC configurator for HART > ή is available free of charge from PMV. All you need is a HART > modem to con-nect the D3 to your computer. The configurator offers you possibility to select cam functions, do a stroke test among many other functions. >

Open the catalog to page 5

Rotation angleMin. 30 max. 100а, optional 270Stroke5Ж130 mm (0.2" to 5.1") Input signal420 mA Air supply2֖7 bar (30105 psi) Free from oil, water & moisture, filtered to min. 30 micron.Air delivery350 nl/min (12 scfm) Air consumption<0.3 nl/min (0.01 scfm) Air connections1/4" G or NPT Cable entry3 x M20 x 1.5 or 1/2" NPT Electrical connectionsScrew terminals 2.5 mmֲ/AWG14 Linearity<1% Repeatability<0.5%Hysteresis<0.4%Dead band0,210% adjustable Display Mechanical Switches TypeSPDT SizeSub Sub miniature Rating100 mA/ 30 V DC/ 42 V AC Namur Sensors TypeProximity DIN 19234 NAMUR Load Current<1mA...

Open the catalog to page 6

Acessories X No acessories M Gauge block (For D3X, D3I only, built in on D3E, D3F) X No feedback option T 420 mA transmitter only + Alarm S* Limit switches MEC + 4-20 mA + Alarm N* Limit sensors NAM + 4-20 mA + Alarm P* Limit switches PXY + 4-20 mA + Alarm 4* Slot type Namur sensor, P+F SJ2 S1N + Alarm 5* Slot type Namur sensor, P+F SJ2 SN + Alarm 6* Slot type Namur sensor, P+F SJ2N + Alarm Feedback option Sensors/Temperature/seals Z No pressure sensors, NBR -30 to 80 deg CY On Board pressure sensors, NBR -30 to 80 deg C 4 4֖20 mA 5 HART, 420 mA P Profibus PA F Foundation Fieldbus (Not for...

Open the catalog to page 7

www.pmv.nu China Flowserve Hanwei Building No. 7 Guanghua Road Chao Yang District 100004 Beijing CHINA Tel: +86 (10) 6561 1900 Fax: +86 (10) 6561 1899 The Netherlands Fabromatic BV Rechtzaad 17 4703 RC Roosendaal THE NETHERLANDS Tel: +31 (0) 30 6771946 Fax: +27 (0) 30 6772471 E-mail: fcbinfo@flowserve.com South Africa Asia Pacific Headquarters Flowserve Unit 1, 12 Director Road Spartan Ext. 2 1613 Kempton Park, Gauteng SOUTH AFRICA Tel: +27 (0) 11 397 3150 Fax: +27 (0) 11 397 5300 Flowserve Pte Ltd. No. 12 Tuas Avenue 20 REPUBLIC OF SINGAPORE 638824 Tel: +65 (0) 687 98900 Fax: +65 (0) 686...

Open the catalog to page 8