XP8X-0X
2Pages

{{requestButtons}}

Catalog excerpts

XP8X-0X - 1

EchoSafe® XP88/89 Ultrasonic Level Transmitter Application FM approved for hazardous environments, the explosion proof ultrasonic level transmitter provides continuous level measurement up to 32.8’ (10m) with a 4-20 mA signal output, and is configured via the integral push button display module. This non-contact liquid level sensor is ideally suited for corrosive, ultrapure, sticky or dirty liquids, and is widely selected for bulk storage, day tank, lift station and process tank level applications located in a classified area. Explosion proof level transmitter for use in hazardous areas Offered in 2 measurement ranges from 24.6’ (7.5m) to 32.8’ (10m) Configuration is simple via integral push button display module Type 4X aluminum XP windowed enclosure with dual conduit ports LCD display indicates level in inches, centimeters or percent of span Narrow 3” beam width for applications with limited measurement space Rugged PVDF transducer and process mounting plug for corrosive liquids Automatic temperature compensation for accurate measurement Refined chemicals are the building blocks of modern products from plastic to aspirin, paint to fertilizer and clothing to detergent. Worldwide there are more than 2900 petrochemical plants in 4300 locations that manufacture refined chemicals from petroleum and hydrocarbon based material. The majority of these manufacturers are located in North America and Europe, but new production facilities are shifting to Austral Asia. Chemical plants are hazardous environments that require explosion proof or intrinsically safe certified instrumentation. Here, an EchoSafe explosion proof ultrasonic level transmitter is installed on the man-way cover of an underground wastewater bulk storage tank. The patented digital signal processing technology features an industry leading 3” beam width that enables installation in close proximity to the 6” suction pipe. Compatible Products FluidWell™ Level Indicator Application CSA approved explosion proof for hazardous environments, the loop powered level indicator displays engineering units connected in series with one 4-20 mA continuous level transmitter. Select this level indicator for hazardous applications with an explosion proof level sensor. The windowed field enclosure is wall mounted. © 2010 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.flowline.com • DS300600 REV C

Open the catalog to page 1
XP8X-0X - 2

EchoSafe ® XP88/89 Ultrasonic Level Transmitter Range: XP88: 8” to 26.2’ (20cm to 8m) XP89: 8” to 32.8’ (20cm to 10m) Accuracy: ± 0.2% of range Resolution: 0.079” (2mm) Dead band: 8” (20cm) Beam width: 3” (7.6cm) Configuration: Push button Memory: Non-volatile Display type: LCD, 6-digit Display units: Inch, cm, percent, feet or meter Supply voltage: 18-28 VDC (loop) Loop resist.: 250 Ohms max @ 24 VDC Signal output: 4-20 mA, two-wire Signal invert: 4-20 mA or 20-4 mA Signal fail-safe: 4 mA, 20mA, 21 mA, 22 mA or hold last Process temp.: F: -4° to 140° C: -20° to 60° Temp. comp.: Automatic...

Open the catalog to page 2

All Flowline catalogs and technical brochures

  1. EchoPod DX10

    2 Pages

  2. EchoPod DL34

    2 Pages

  3. Flowline

    28 Pages

  4. EchoPro LR11

    2 Pages

  5. LZ12-14X5

    2 Pages

  6. XT10-XXX5

    2 Pages

  7. AVXX-S243

    2 Pages

  8. LD1X-S041

    2 Pages

  9. LC52-1001

    2 Pages

  10. LC1X-10XX

    2 Pages

  11. LAXX-50X1

    2 Pages

  12. LA12-X0X1

    2 Pages

  13. DX10-XX

    2 Pages

  14. DS14-XX

    2 Pages

  15. DL34-XX

    2 Pages

  16. DL24-XX

    2 Pages

  17. DL14-XX

    2 Pages

  18. DL10-XX

    2 Pages

  19. AXXX-434X

    2 Pages

  20. AX23-43XX

    2 Pages

  21. AX1X-X6XX

    2 Pages

  22. AX1X-X63X

    2 Pages

  23. AX1X-X24X

    2 Pages

  24. AX1X-X13X

    2 Pages

  25. AX13-X1XX

    2 Pages

  26. AV17-SX01

    2 Pages

  27. 300400

    2 Pages