*mydirectindustry

Catalogs
Flowline
Two-Wire Float Level Transmitter

Two-Wire Float Level Transmitter

Product catalog summary

Overview: The FloaTek Two-Wire Float Level Transmitter is designed for contact level measurement in process tanks, suitable for clean water, light oil, or diluted corrosive liquids. It is available in explosion-proof and general-purpose configurations, making it ideal for high temperature and pressure applications in hazardous or general-purpose areas.

Specifications:

Range: 5" to 72" (12.7 cm to 1.8m)
Accuracy: 0.25" over span in water
Specific Gravity: 0.75 minimum
Orientation: ± 30˚ from vertical
Supply Voltage: LV50: 10 to 30 VDC, LV51: 10 to 40 VDC
Loop Resistance: 600 Ohms @ 24 VDC
Signal Output: 4-20 mA, two-wire
Signal Invert: 4-20 or 20-4 mA
Calibration: None, fixed span
Process Temperature: -40˚ to 230˚F (-40˚ to 110˚C)
Electronic Temperature: -40˚ to 160˚F (-40˚ to 71˚C)
Pressure: 300 psi maximum
Enclosure Rating: LV50: NEMA 4X (IP65), LV51: NEMA 7 (IP65)
Materials: LV50: PP, UL94VO; LV51: Aluminum; Guide/Float: 316 SS
Process Mount: 2" NPT
Conduit Entrance: Single, 1/2" NPT
Classification: LV50: General purpose, LV51: Explosion proof
Approvals: LV50: UL, CSA; LV51: FM: Class I, Division I, Groups B, C & D; Class II, Groups E, F and G
CE Compliance: EN 50082-2 immunity, EN 55011 emission

Ordering Notes:

Specify dimensions A, B, and C at the end of the part number in 1/2" increments.
Guide length (A-dimension) ranges from 12" to 72".
Minimum span (B-dimension) is 0.25".
Maximum offset (C-dimension) is A-dimension minus B-dimension minus 3.5".

Features:

Rugged 316 stainless steel float and guide.
Compatible with Flowline remote indicator and relay controllers.
Custom assembled to exact guide length and span dimensions.

Catalog excerpts

2" NPT Dia. 2.1" > (52mm) 0.5" 2.8" (13mm) (71mm) B-dim(Specify) 2.7" > (70mm) 4.6" > (117mm) C-dim (Optional) 6.1" > (156mm) A-dim (Specify) > Specifications are subject to change without notice. DCPowerSupply 18-36VDC +- -+ RWBR5R1 +- The FM and CSAapproved explosion proof con-figuration is provided with a cast aluminum enclosure for use in Class I, Division I, Groups B, C & D; Class II, Groups E, F and G hazardous area applications. DCPowerSupply 18-36VDC -+ +- SPANNULL 123456 10500 Humbolt Street ? Los Alamitos, CA90720 ? www.flowline.com ? T (562)598-3015 ? F(562) 431-8507 size="-2">

Open the catalog to page 2

Two-Wire Float Level Transmitter

Two-Wire Float Level Transmitter

Catalog excerpts

All Flowline catalogs and technical brochures