EchoSpan® LU80-84 Ultrasonic Liquid Level Transmitter & RoHS Compliant Application The general purpose ultrasonic transmitter provides continuous level measurement up to 32.8’ (10m) with a 4-20 mA signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is well suited for corrosive, ultrapure, sticky or waste liquids, and is selected for bulk storage, tanker truck and neutralization tank applications. ce Features ■ Offered in 4 measurement ranges from 9.8’ (3m) to 32.8’ (10m) ■ Configuration is simple via integral push button display module ■ LCD display indicates level in inches, centimeters and percentages ■ Narrow 2” or 3” beam width for applications with limited measurement space ■ Fail-safe intelligence and diagnostic feedback for simple troubleshooting ■ PVDF transducer and NEMA 4X polycarbonate enclosure for corrosive liquids ■ Automatic temperature compensation for accurate measurement Success Thermoelectric power plants use tens of millions gallons of water per day in their steam turbines and cooling towers. As such, most US plants are located in the Coastal or upper Midwest states with easy access to abundant ocean or lake resources. These facilities have lots of sumps that collect and pump transfer water into treatment for reuse or release to the environment. But the sumps capture much more than water including grease, oil and chemicals that coat everything in the pit. Here, an EchoSpan ultrasonic level transmitter is installed over the sump man-way. The patented digital signal processing technology features an industry leading 3” beam width that enables installation in close proximity to the ladder and side wall. DATALOOP™ DATAVIEW™ Level Indicator Level Controller © 2019 Flowline I 10500 Humbolt Street, Los Alamitos, CA 90720 USA p 562.598.3015 f 562.431.8507 w flowlin

Ultrasonic Liquid Level Transmitter FLOWLINE LEVEL BEST Specifications Dimensions Range: Accuracy: Resolution: Dead band: Beam width: Configuration: Memory: Display type: Display units: Supply voltage: Loop resist.: Signal output: Signal invert: Signal fail-safe: Process temp.: Temp. comp.: Ambient temp.: Pressure: Enclosure rating: Encl. material: Encl. hardware: Enclosure vent: Conduit entrance: Trans. material: Process mount: Mount gasket: Classification: Compliance: Fittings For optimum performance, install the level sensor using the below recommended or direct equivalent fittings. DESCRIPTION...