DS14-XX

DS14-XX

DS14-XX

Product catalog summary
Overview: The EchoPod DS14 Ultrasonic Level Switch & Controller is a general-purpose device designed for continuous level detection up to 49.2 inches (1.25 meters). It features four programmable relays for level switch or control functions and is configured using WebCal software and a USB adapter. The device is suitable for small tanks and is optimized for corrosive, sticky, or dirty liquids.
Specifications:
  • Range: 49.2 inches (1.25 meters)
  • Accuracy: 0.125 inches (3mm)
  • Resolution: 0.019 inches (0.5mm)
  • Dead band: 2 inches (5cm)
  • Beam width: 2 inches (5cm)
  • Supply voltage: 12-24 VAC/VDC
  • Consumption: 0.5W
  • Contact type: Four SPST relays, 1A
  • Process temperature: 20°F to 140°F (-7°C to 60°C)
  • Pressure: MWP = 30 PSI (2 bar)
  • Enclosure rating: Type 6P, corrosion-resistant and submersible
  • Materials: Polycarbonate enclosure, PVDF transducer, Santoprene strain relief, Polyurethane cable jacket
Features:
  • Fast and easy configuration via WebCal software
  • Narrow beam width and short dead band for small tanks
  • Four programmable relays for switch, pump, or valve control
  • Automatic temperature compensation for accurate measurement
Applications: The device is ideal for use in small day tanks, skids, IBCs, sumps, and process tank level applications. It is particularly useful in environments where metal parts are painted in dip tanks, controlling fill valves with high and low-level alarms.
Installation and Configuration: The level sensor should be installed using Flowline installation fittings or equivalents. Configuration is done via WebCal software and a LI99-1001 Fob USB adapter. Fobs are universal and can be used with any WebCal compatible product.
Compliance and Approvals: The device complies with CE and RoHS standards and has cFMus approvals.
See more

Catalog excerpts

DS14-XX-1

® EchoPod ® DS14 Ultrasonic Level Switch & Controller Application The general purpose ultrasonic level switch provides continuous level detection up to 49.2” (1.25m) with 4 programmable relays for level switch or level control functions, and is configured via our free WebCal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for small day tank, skid, IBC, sump and process tank level applications. Features Success • • Configuration is fast and easy via WebCal software and USB adapter • Narrow 2” beam width and short 2” dead band optimized for small tanks • Four (4) programmable relays rated @ 1A / 60VA for switch, pump or valve control and fail-safety Metal parts are often Level detection, switch and control functions up to 49.2” (1.25m) painted in dip tanks to achieve a clean, uniform coating. In this process, suspended parts are briefly submerged, and then removed to rack dry in temperature and humidity controlled • 1 pump or valve with 3 alarms • 2 pumps (lead-lag) with 2 alarms • 2 pumps (duplexing) with 2 alarms • 4 independent switch point alarms rooms. Dip tanks are generally 2’ to 4’ deep with level • PVDF transducer and 6P polycarbonate enclosure for corrosive liquids wire, 4-20 mA level measurement signal is monitored • Automatic temperature compensation for accurate measurement and mixer automation. Here an EchoPod multi-function level sensor controls the fill valve on each tank with a high and low level alarm. Additionally, the twoby the PLC. An optic level switch is also deployed as a redundant high level alarm. Compatible Products DataLoop™ DataView™ Level Indicator Commander™ DataPoint™ Multi-Tank Level Controller Level Controller Level Controller LI25 LI55 LI90 LC52 © 2010 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.flowline.com • DS300220 REV B

 Open the catalog to page 1
DS14-XX-2

® EchoPod ® DS14 Ultrasonic Level Switch & Controller Accuracy: 0.125” (3mm) Resolution: 0.019” (0.5mm) Dead band: 2” (5cm) Beam width: 2” (5cm) Configuration: WebCal® PC Red Blk Wh t Gr y Blu Or g Yel Pur Brn 49.2” (1.25m) Windows® USB 2.0 Memory: 48" (1.2 m) Range: Configuration Dimensions Specifications - Power Return TX (Out) RX (In) Rly 1 Rly 2 Rly 3 Rly 4 Rly Com 2.00" The level sensor is configurable via our free WebCal PC software and Fob USB adapter. The sensors are offered with and without Fobs. Fobs are universal and can be used to configure any WebCal compatible product. (51 mm) Non-volatile...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.