*mydirectindustry

Catalogs
Flowline
DeltaSpan LD30

DeltaSpan LD30

Product catalog summary

Overview: The DeltaSpan LD30 GP External Mount Pressure Level Transmitter is designed for continuous level measurement up to 69 feet (21 meters) of water column, providing a 4-20 mA signal output. It is available in two termination styles: cable termination (-S_01) and conduit termination with an integral junction box (-S_11). The device is suitable for clean liquid or gas media, including applications like cutting oil and air.

Features:

Corrosion-resistant 316 stainless steel transducer with threaded mount.
Available with polyurethane cable or junction box termination.
Automatic temperature compensation for accurate measurement.
Simple 1/4” process mount installation, ideal for limited space applications.
Direct connection to PLC/SCADA or display systems.
Fixed span that does not require calibration.

Specifications:

Range: 0 to 5 psi (0.34 bar) / 11’ (3.4m) wc, 0 to 15 psi (1 bar) / 34’ (10.4m) wc, 0 to 30 psi (2 bar) / 69’ (21.1m) wc.
Accuracy: ±0.25% of full scale.
Supply voltage: 13-30 VDC.
Signal output: 4-20 mA, two-wire.
Process temperature: 0° to 200°F (-18° to 93°C).
Temperature compensation: 0° to 175°F (-18° to 79°C).
Proof pressure: 2x full span.
Response time: 50ms.
Weight: 10 oz (283 g).
Enclosure rating: NEMA 4X (IP65).
Enclosure material: 316 SS.
Termination options: Cable (-SX01) or Junction box with 1/2” NPT conduit (-SX11).
Cable type: 2-conductor, shielded, 9’ (2.7m) length, polyurethane material.
Process mount: 1/4” NPT.
Classification: General purpose.
Compliance: CE certified.

Applications: The transmitter is well-suited for use in environments with clean liquids or gases, such as cutting oil and air.

Ordering Information: For enhanced flexibility and performance, it is recommended to use the LC95-2001 AC-DC power supply. The sensor range and termination options are specified in the ordering notes.

Catalog excerpts

DeltaSpan™ LD30 GP External Mount Pressure Level Transmitter Application The general purpose LD30 external mount pressure level transmitter is offered in two styles of termination and provides continuous level measurement up to 69’ (21m) of water column with a 4-20 mA signal output. Select the -S_01 level sensor for cable termination or the -S_11 level sensor for conduit termination with an integral junction box. This liquid or air level sensor is well suited for clean liquid or gas media. Applications include cutting oil and air. Available with polyurethane cable or junction box termination Automatic temperature compensation for accurate measurement Simple 1/4” process mount installation Ideal for applications with limited space Corrosion resistant 316 SS transducer with threaded mount Connects directly to PLC/SCADA or display Fixed span does not require any calibration Compatible Products DataLoop™ Level Indicator Level Controller Multi-Tank Level Controller Level Controller © 2013 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.

Open the catalog to page 1

DeltaSpan™ LD30 GP External Mount Pressure Level Transmitter Specifications None, fixed span Supply voltage: 13-30 VDC Loop resist.: Signal output: Temp. comp.: For enhanced flexibility and performance, use the recommended power supply. Proof pressure: 2 x full span Response time: 50ms Weight: Enclosure rating: NEMA 4X (IP65) AC-DC Sensor & Indicator Power Supply Cable type: Cable length: Cable material: -SX01: Polyurethane Process mount: 1/4” NPT Sensor material: 316 SS Classification: General purpose DeltaSpan Industrial Pressure Level Transmitter LD30 Ordering DeltaSpan Notes Ordering Notes...

Open the catalog to page 2

DeltaSpan LD30

DeltaSpan LD30

Catalog excerpts

All Flowline catalogs and technical brochures