® Smart Trak™ AX23 with Compact Level Controller Application The general purpose level switch package provides automatic tank filling or emptying up to 10’ (3m) between two adjustable level switch points. The compact level controller with optional strobe provides one latching 16A relay for pump or valve control. Offered in three level sensor technologies, select the type based upon your application media. This polypropylene liquid level switch package is widely selected for sump, process and day tank level applications. IP 65 Features Key Benefits • Fail-safe relay control of pumps or valves with 0-60 second delay • Field adjustable sensors allow for field corrections • Offered in 3 sensing technologies for broad application coverage: ultrasonic, vibration & buoyancy • Mounts on the top wall of tank • Ideal auto fill/empty controller Easy setup with LED indicators for sensor, power and relay status • Internal 16A relay connects directly to values/ pumps Rugged polypropylene construction for use in corrosive liquid environments • All-in-one package, simply add 120/240 VAC power • • • Adjustable level switch cars enable sensor adjustment in the field • Invert switch changes relay state from NO to NC without rewiring Compatible Products Switch-Tek™ Switch-Tek™ Ultrasonic Level Switch Switch-Tek™ Vibration Level Switch LU10 Broadly applied in chemicals and light weight oils Vertical Buoyancy Level Switch LZ12 Applied in wastewater with light coating or scaling LV10 Applied in clean water and noncoating chemicals © 2010 Flowline Inc. • 10500 Humbolt Street Los Alamitos, CA 90720 • 562.598.3015 • www.flowline.com • DSSTAX23 REV A

® Smart Trak™ AX23 with Compact Level Controller Specifications Length: 8” to 10’ (20cm to 3m) Accuracy: ± 1mm in water Repeatability: ± 0.5mm in water Orientation: ± 20° vertical Switch points: 2 (field adjustable) LED indication: Power, relay & sensor Supply voltage: 120 / 240 VAC @ 50-60 Hz Consumption: 0.25A maximum Strobe type: -431X: N/A -432X: Xenon tube Strobe flash: -431X: N/A -432X: 1 per second Contact type: (1) SPDT relay, latching Contact rating: 250 VAC @ 10A Contact output: Selectable NO / NC Contact delay: 0-60 seconds Contact latch: Selectable ON / OFF Process temp.: F: -40°...