1. Catalogs
  2. Flow-Mon
  3. Wafer series

Wafer series
1 /4Pages

Wafer series

Wafer series
1 /4Pages

Catalog excerpts

Wafer series-1

De-Ionised Water Petroleum Based Fluids Coolants Paints Air & Gases ...simple flow solutions in a Wafer Series Technical Specifications Function; A scaled dial and mechanical indicator continuously monitor the flow rate at any given time whilst electrical switches can be specified to signal when a particular level has been reached during increasing or decreasing flow rates. Style; Through its unique modular design it allows for easy field installation and service. It does not require any straight pipe runs before or after the monitor thus minimizing the installation footprint. The versatile design of the vane monitor allows for orientation to be mounted in any position. Vane style monitor operates when flow is introduced through the inlet connection making direct contact with the vane that is mechanically linked to the indicator shaft, the fluid forces the vane to open. The vane style monitor is spring loaded and allows the vane to return on decreasing flows. Switches; Are field adjustable, suitable for batching, trending, totalising or recording where required. All Flow-Mon units can be supplied with a 0-10v or 4-20mA output. Sizes; All sizes are manufactured to the same simple design concept, the main characteristic of which ensures that the pressure drops are confined to an absolute minimum across the vane orifice at full flow, with viscosities as high as 600cS. Sizes are defined by pipe size and/or maximum flow capacity, and every flow switch is individually calibrated so that full scale deflection is used in each application i.e. the maximum scale reading coincides with the maximum requirements of system as specified by the customer. Calibration may be in any units with Single or Dual scale to specification. Applications; Water Soluble Oils (Glycols) Synthetic Based Fluids Corrosive Fluids Solvents Minimum Scale; lpm 0-40 lpm Comparison; Comparable to similar style devices in the industry, Flow-Mon’s “flow through” design offers a low pressure loss. To ensure accuracy they are individually calibrated in any unit of measure to customer operating specifications. Features; • Direct reading Flow Rate Indication • Optional (field adjustable) switch(es) • Optional Non-Contact 4-20mA Output • High Pressure available • Mounts easily between Ansi, Jis or Din flanges • Mounts in any orientation • No straight Pipe Run required • Connection sizes from 3” to 12

 Open the catalog to page 1
Wafer series-2

SERIES AND FLOW RATE FMS* = Litres/Sec *Add Full Flow Rate in Units MATERIAL OF MANUFACTURE AL = Aluminum CI = Cast Iron CIK = Cast Iron Nickel Plated S = Carbon Steel SS = Stainless Steel PTFE = PTFE Note: For materials and pressures not specified, please consult factory. ‘O' RING SEAL MATERIAL S1 = Buna (-40°C PRESSURE RATING LP = 300 psi / 20 bar maximum > Sizes 3" - 8". Standard units have Wafer Bodies - add relevant code letters (shown below). For Flanged Connections add one of the following codes: INDICATOR READ OUT ME = Mechanical Pointer only 3EE =...

 Open the catalog to page 2
Wafer series-3

Wafer Series Installation and Maintenance Instructions Installation Instructions; The flow indicators are in-line devices. Mounting can be in any position, and no straight length of pipe is required before or after the unit. The unit is sandwiched between two flanges. Under the Pressure Equipment Directive (PED) these products are Pressure Accessories, and are not approved for use as safety Accessories, as defined by the PED. If used for safety purposes, it is the responsibility of the user/installer to assess the suitability of the product in the pressure equipment or system in which it is used....

 Open the catalog to page 3
Wafer series-4

Wafer Series Spares Data When ordering spares, please give reference number followed by quantity required. All orders should be accompanied by a model number and a serial number of the Flow switch! Part No. Wafer Body Wafer Al Neck Indicator Rod Indicator Rod - Boss Indicator Rod - Peg Valve Plate Indicator Rod - Bearing Collar Collar - Peg Pointer Boss Pointer Indicator Housing Indicator Plate Medium Spring Housing Spirol Spring For further information contact: Tel: 01423 561972 Fax: 01423 502063 Email: [email protected] www.flow-mon.com Flow-Mon Limited, Chatworth House, Chatsworth Terrace, Harrogate,...

 Open the catalog to page 4

All Flow-Mon catalogs and technical brochures

  1. Spinner

    12  Pages

  2. Medium series

    4  Pages

  3. small series

    4  Pages

  4. spinner

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.