QSE MAG FLOWMETER The QSE Mag Series is a dependable highly accurate electromagnetic flowmeter designed for flow and usage monitoring in commercial applications. The NorylTM housing and flow tube offer a lightweight, easy-to-install Mag Meter that is resistant to heat (210°F [99°C]) and compatible with many water-based liquid solutions. The QSE Mag Meter monitors flow rate and total flow in a wide variety of applications including: HVAC, Turf/ Irrigation and other water reclamation applications. FEATURES / BENEFITS • Low investment and operating costs • ± 0.5% Accuracy of Reading (from 0.25 fps to 15 fps [0.08 to 4.6 m/s]) QSE = Electro-Magnetic Flow Meter SIZE ft 05 = 1/2” (15 mm) 07 = 3/4” (20 mm) 10 = 1” (25 mm) 15 = 1-1/2” (40 mm) 20 = 2” (50 mm) 30 = 3” (80 mm) (Flange only) 40 = 4” (100 mm) (Flange only) FITTING F NPT = NPT (Male) (te” to 2” Only) BSP = BSPP (Male) (ISO 228) (te” to 2” Only) FAP = ANSI Flange - Polymer (3” & 4” Only) FAS = ANSI Flange - Steel (3” & 4” Only) FDS = DIN Flange - Steel (3” & 4” Only) ELECTRONIC CHOICE ft 09 = 2-Button Integral Display, Field Configurable (Cumulative, Batch & Rate) and Integral Pulse Transmitter (Open Collector Square Wave), Includes Four Strain Reliefs QB = Integral Pulse Transmitter (Open Collector Square Wave), Includes Four Strain Reliefs COMMUNICATION CHOICE f Q1 = Integrates with Any Electronic Choice QSI Module: Blue Tooth®, Coil/Digital Pulse Input, Pulse Output (Flow or Energy & Scalable), RS485 (MODbus RTU), Temperature Inputs, BTU Calculator. Energy Use Computation Note: Energy Use Computation Requires Temperature Sensor Probes (Select Probes Below) Q2 = Integrates with Any Electronic Choice QSI Module: Blue Tooth®, Coil/Digital Pulse Input, Pulse Output (Flow or Energy & Scalable), Data Logger, Temperature Inputs, BTU (Heat) Calculator. Energy Use Computation Note: Energy Use Computation Requires Temperature Sensor Probes (Select Probes Below) Q3 = Integrates with Any Electronic Choice QSI Module: Blue Tooth®, Coil/Digital Pulse Input, Pulse Output (Scalable), Data Logger, 4-20mA. XX = No Communication Suite TEMPERATURE SENSOR PROBES W • Wide turndown ratio of 60:1 • Non-intrusive, no moving parts to wear out, maintenance, repair costs low and tolerates high flows without damage • The slightly modified bore permits unobstructed flow and minimizes flow disturbances and straight pipe requirements • 7 line sizes (te” to 4”) te”, %”, 1”, 1-te”, 2”, 3", & 4” • Housing ported with “Thermal Well Supports” for sensors (Energy Management) • Compatible with GPI 09 Electronics Display or FLOMEC QSI I/O Board 1 = Integrates with QSI Communications Choice for Energy Use Computation (2ea) 1" (25 mm) Long Temperature Sensor Probes w/Cables (10 ft. [3 m]) (Customer Installed), Used with 1/2" through 2" Meters 2 = Integrates with QSI Communications Choice for Energy Use Computation (2ea) 2" (50 mm) Long Temperature Sensor Probes w/Cables (10 ft. [3 m]) (Customer Installed), Used with 3" and 4" Meters X = No Temperature Probes PACKAGING (Auto Select) A = 1/2" - 2" Meters B = 3" Meter C = 4" Meter ft ft

Fitting Type: APPLICATIONS • Agriculture Irrigation • Turf Irrigation Systems • Micro Irrigation Systems • HVAC • EMS (Energy Management Systems) • BAS (Building Automation System s) • Chilled water • Domestic water (hot and cold • Energy sub-metering (BTU hot and cold) • Process (blow down, make up, boiler feed, etc.) Dtrattd Pressure Curvt for QSE (Pressure vs Ttmptraturt) Service & Warranty: For technical assistance, warranty replacement or repair contact your FLOMEC® or GPI® distributor: In North or South America: 888-996-3837 / FLOMEC.net Outside North or South America: +61 2 9540 4433 /...