FLOMEC® Modular Air Eliminator Strainor is suitable for removal of entrained air and vapor bubbles from low and medium viscosity liquids, up to a limit of approximately 10OcP. For removal of large air volumes from a flow stream, or for gas elimination in high viscosity liquids, please contact Flomec regarding our large capacity air separator tanks. The Eliminator Strainer can be purchased as a stand-alone or close coupled strainer unit, or as a multifunction air eliminator & strainer. As the ES assembly is modular, these two configurations are interchangeable in the field. Wafer back-pressure check valves can also be purchased for fitment between a FLOMEC® meter and the Eliminator Strainer. The back pressure check valve provides the necessary back pressure required for correct operation of the air eliminator, and ensures that the flow system cannot experience reverse flow. Back-pressure check valves should be purchased for any flow systems that do not have a minimum of 30kpa (approx. 4psi) backpressure present. General Specifications GREAT PLAINS INDUSTRIES AUSTRALIA

Model Coding A ; ALirrinum body Stahiess Steel screen element Mesh sizing_ 1 I Standard nominal • mesh (morons) Process connections Function options •integral check valve only available when dose coupled to flowmeter Coupling options BSPfttrjsonnietS outlet of stranen BSPfttng co inlet 4 flow meter cooping flange cn cutfet O’/ / FLOnrec / prd GREAT PLAINS INDUSTRIES AUSTRALIA