Flomec small capacity flowmeters
3Pages

Flomec small capacity flowmeters Volumetricflow measurement of clean liquids orlowflows used in automotive, aviation, mining, power, chemical, pharmaceutical, food, paint, petroleum industries and environmental applications. For metering additives forfuel, consumer products, water treatment and flotation cells, corrosion inhibitors, catalysts, emulsifiers, oils, grease, fragrances, adhesives, solvents, ink and insecticides. . Features / Benefits • High accuracy and repeatability, direct volumetric reading • No requirement for flow conditioning (straight pipe runs) • Stainless Steel rotors (Optional PPS Rotor for OM008 meter) • Measures high and low viscosity liquids • Quadrature pulse output option and bi-directional flow • Optional Exd l/IIB approval (ATEX, lECEx) • PF option available for metering pulsating flows • Only two moving parts Meter Selection • Aluminium meters for petroleum products (oils and grease, fuels and fuel oils) • Stainless steel meters for the chemical, cosmetic, food and pharmaceutical industries (water based liquids) • Blind pulse meters available with reed switch and Hall Effect outputs. Optional Quadrature pulse and Integral 4-20mA outputs available Integral Instruments Options include integral LCD totalisers, flow rate totalises and batch controllers (4-20mA, scaled pulse, alarms and batch control) • BT LCD 5-digit reset, 8-digit cumulative totaliser • RT12 LCD 6-digit reset, cumulative totaliser and flow rate, analog and pulse outputs • RT40 LCD 6-digit reset, cumulative totaliser and flow rate. Backlit Display • EB LCD 6-digit 2 stage batcher and cumulative totaliser (Available for remote mounting and with I.S. approvals) General Specification Flow Rates: 0.16 -145 US gal/hr. (0.5 - 550 litres / hr.)* Sizes: 1/8" - 3/8" NB (4 - 8mm) Materials: Aluminium, 316 Stainless steel NMI Approved Meters Meters 1" and above available with optional NMI pattern approval and quadrature pulse output National Measurement Institute (NMI) Weights and Measures Approval - Australia * See also Medium and Large Capacity data sheets for other size mete

Electrical - for pulse meters (see below for optional outputs) Service & Warranty: For technical assistance, warranty replacement or repair contact your Flomec distributor or GPI: In North or South America: 888-996-3837 / GPI.net Outside North or South America: +61 2 9540 4433 / flomec.com.au RT12 GRN HOUSING RT12 ALLOY HOUSING \ MOUNTING FOOTPRINT Mexico City ' Sydney ' Wichita ©2014 Great Plains Industries. Inc. All rights reserved. tESSS/V and Flomec’u are trademarks of Great Plains Industries. Inc.

MODEL CODING FLOMEC'** OM‘ Oval Gear Pulse Meter Includes MG oval gear meters Model Size 1/8” 1/4" 3/8" (1/4” high press.) Body material lAluminium 3161 Stainless Steel _ Intermediate pressure 316L SS meters (100 bar |1450psi)) High Pressure 316SS (400bar (5800psi), 008H has '/•" connection) Rotor material PPS - Teflon filled (Polyphenylene Sulfide) (not available for 150°C metersjonly available in OM008 Keishi cut PPS rotors (for high viscosity liquids) (not available for 150*C meters) only available in OM008 Stainless steel (standard on OM004 8i OM006, optional on other sizes) Keishi...