FLOMEC® AIM Block is a compact all stainless steel manifold assembly complete with isolating, flow regulating & check valves, a fine mesh strainer, solenoid valve & a precision oval gear flowmeter. AIM injects small amounts of modifying additives & performance enhancing agents into fuels, & base products. These include lubricants, dyes, colorings, denaturants, detergents, odorizing, anti-freeze, anti-corrosion, anti-static, anti-detonating, anti-icing, anti-foaming and emulsifiers. AIM block will work well with any controller or TAS system, serving as a composite slave assembly for accurate blending of fuel additives to fuels at loading facilities, stationary & mobile transfer units within the petroleum industry worldwide. FEATURES / BENEFITS • Compact stainless steel design with stainless gears • All valve assemblies and the meter are detachable • Modular process connections (directional) • High accuracy & repeatability (±1%) • Simple to install, easy to service in situ • ATEX/IECEx approved Explosion proof • Lubricants • Dyes • Colorings • Denaturants • Detergents • Odorizing • Anti-freeze PRODUCT IDENTIFIER fl AIM = Additive Injection Manifold METER SIZE □ 004 = 1/8 in. (4 mm), 0.26-9.5 GPH (1-36 L/hr) 006 = 1/4 in. (6 mm), 0.5-27 GPH (2-100 L/hr) 008 = 3/8 in. (8 mm), 4-145 GPH (15-550 L/hr) SEAL MATERIAL Ip 1 = FKM (Viton™) (standard for Alum.) -5° F minimum (-15° C) 3 = Chem-Kit, comprises Teflon & Perfluorelastomer (Kalrez-Kemraz) O-rings -5° F minimum (-15° C) METER PROTECTION APPROVAL [T 1 = lECEx / ATEX approved CABLE ENTRIES B 1 = M20 x 1.5 mm 2 = 1/2 in. NPT SOLENOID VALVE VOLTAGE Ip 1 = 24V (dc) x 9W coil (maximum operating pressure 100 psi [7 bar]) 2 = 110-115V (ac) / 60 hz x 8W coil (maximum operating pressure 295 psi [20 bar]) 3 = 220-230V (ac) / 50 hz x 8W coil (maximum operating pressure 295 psi [20 bar]) SOLENOID VALVE PROTECTION APPROVAL |T 1 = lECEx / ATEX approved coil SOLENOID VALVE ORIFICE Ip 3 = 3 mm (V (dc) coil = 100 psi [7 bar], V (ac) coil = 145 psi [10 bar] max. differential pressure) 5 = 5 mm (V (dc) coil = 50 psi [3.5 bar], V (ac) coil = 123 psi [8.5 bar] max. differential pressure) INTEGRAL OPTIONS f 0 = Hall Effect output HR = High resolution Hall Effect output (Not available for AIM008) • Anti-corrosion • Anti-static • Anti-detonating • Anti-icing • Anti-foaming

SPECIFICATIONS Housing Material: Nominal Size: Process Connections 3/8 in. NPT Elbows, 3x 90˚ orientation positions Temperature Range: DC Solenoid Coils; 100 psi (7 bar) AC Solenoid Coils; 295 psi (20 bar) Electrical Output Resolution - Nominal Pulses per Gallon (Pulses / L) Hall Effect High Resolution Hall Effect Output (NPN) 3 wire open collector, 5 - 24V (dc) max, 20mA max Protection Class: *Maximum flow is to be reduced as viscosity increases, see flow de-rating guide. Service & Warranty: For technical assistance, warranty replacement or repair contact your FLOMEC® or GPI® distributor: In...