Globe & Wafer Style Check Valves
6Pages

Click to see: Globe & Wafer Style Check Valves in our Online Catalog FL^M/JIC VALVES Click to see: Globe & Wafer Style Check Valves in our Online Catalog FL^M/JIC VALVES High Quality Valves Built to Last...

Valve Size Operation: The compact valve body design allows a flow area exceeding the pipe area to minimize flow losses and maximize efficiency. The unique spring loaded, stainless steel disc and guiding system insures quick closing of the valve which minimizes water hammer. Optional resilient sealing (Viton, Buna, EPDM). Installation: The Flomatic model 812XT/XS all stainless steel valve is designed for simple flange supported installation and will operate well in any position. This valve has NPT threaded connections or optional socket end connections. Applications: ■...

NSF/ANSI 61 CERTIFIED Model 812X: 1/2"-4" The compact valve body design allows a flow area exceeding the pipe area to minimize flow losses and maximize efficiency. The unique spring loaded, stainless steel disc and guiding system insures quick closing of the valve which minimizes water hammer. The model 812X, metal seated, all stainless steel valve is designed for simple flange-supported installation and will operate equally well in any position. Cracking pressure is extremely low. Metal seating standard, consult factory for resilient seat. Dual flange rating to fit between 150# and 300#...

NSF/ANSI 61* CERTIFIED FOR DRINKING WATER Metal to Metal seating standard. Optional rubber seal available for drip tight seal, add “R” to end of part #, add “ST” to the end of the part # for stainless steel trim, add “V” for viton. * Not all model approved Consult factory for latest list Installation: The model 888 valve is designed for simple flange-supported installation and will operate equally well in any position. Suitable for dual flange ANSI 125 and 250 mounting, except for 8" and 10" sizes. Operation: The convex inlet,double guided spring loaded poppet system maximizes efficiency...

*** Optional Resilient Seat Available ANSI CLASS 125# Petroleum ■ Irrigation ■ HVAC ■ Industrial Globe Style Body for Maximum Flow Field Replaceable Internal System Full Faced Pressure Max: 200 PSI 2"-12" 150 PSI 14"-24" For stainless steel trim drop BT then add ST for all Operation' stainless construction add S6. The double guided spring loaded poppet system maximizes efficiency and reduces water hammer while preventing flow reversal. Tight closure is assured with specially unleaded bronze poppet to unleaded bronze seats. The stainless steel spring provides for long maintenance free...

Two independent discs, hinged on a common shaft are held parallel against an elastomer seat by torsional spring force. Installation: Flomatic Split Disc® check valves are designed for simple flange-supported installations between standard flanges in the horizontal or in the vertical flow up position. For horizontal flow applications valve must be installed with disc hinge to insure proper operation. Applications: ■ General Utilities ■ Chemical ■ Power Generation ■ HVAC ■ Marine Benefits: ■ Low headloss ■ Compact ■ Reliable ■ Temp Max: 180°F pin in the vertical position ■ Petrochemical ■...