video corpo

FLO-E-CENTRIC
2Pages

{{requestButtons}}

Catalog excerpts

FLO-E-CENTRIC - 1

Flomatic Series 5400 Round-Port Eccentric Plug Valves ANSI/AWWA C517-09  100% Full-ported Globe Body Design Heavy Duty Class #150 ANSI B16.5 2” thru 12” Mechanical Joint Model 54-4MJ 6” thru 24” (ANSI/AWWA C111-A21.11) Welded nickel body seat Stainless Steel Fasteners Epoxy Coated (Inside/out) Applications The Flomatic Model Flo-E-Centric® Valve is a heavy duty service valve with a wide industrial application range. Designed primarily for the water and wastewater markets. Other applications includes handling a variety of liquids, slurries, gasses, including air and some chemicals. Valve Port: The round-port valve design improves the dynamic characteristics of the flow, saving energy cost. The 2"- 6" sizes are 100% full-ported valves. The larger 8"-12" sizes are reduced to a minimum 90% porting. Full Port Design Eccentric Plug: The Flomatic Flo-E-Centric Spherical plug forming circular seat and plug face are offset from the shaft centerline to provide tight shut off and wear resistance. The specially designed plug moving in and out of the seat with minimal contact results in low operating torque. Pressure Class: Threaded 2” NPT is rated 200 PSI (Direct or Reverse Flow). Flanged 3”-12” (80mm-300mm) ANSI/ASME B16.1, Class #150 Flanged ductile iron body construction, 3” thru 8” rated 200 PSI and 10” and 12” sizes rated 175 PSI (Direct or Reverse Flow) at temperatures up to 100º F. Mechanical Joint End (MJ) in 3”-12” sizes optional in 2016. Materials: Model Flo-E-Centric® Valve bodies, bonnet and plug are constructed of ASTM A536 Grade 65-4512. Also, the valve body shows the casting heat number for quality assurance. Plugs are fully encapsulated with resilient facing per ASTM D2000-BG and ANSI/AWWA C517 requirements. All stainless steel fasteners and washers. Flomatic Corporation 15 Pruyn’s Island Drive, Glens Falls, New York 12801

Open the catalog to page 1
FLO-E-CENTRIC - 2

Simple Construction (MJ Connection optional) Standard valve Model 54-0 available in 3” thru 12” and Model 54-4MJ 6” thru 24” have totally enclosed and sealed worm gear actuator with position indicator (above ground service) and externally adjustable open and closed stops. The worm segment gear is ASTM A536 Grade 65-45-12 ductile iron with a precision bore and keyway for connection to the valve shaft. Bronze radial bearings shall be provided for the segment gear and worm shaft. Alloy steel roller thrust bearings shall be provided for the hardened worm. All gear actuators are designed to...

Open the catalog to page 2

All Flomatic catalogs and technical brochures

  1. Kwik-Close

    2 Pages

  2. Foot Valves

    4 Pages

  3. SYLAX™

    2 Pages

  4. Gate Valves

    4 Pages