Flomatic Corporation Constant Pressure Pump Control Valve Model C152E Size: %” - 2” Delivers Constant Pressure Automatically uriLtaxD ENVIRO-CHECK* FLOMATIC vaiv€s • Domestic Well Water Systems • Municipal/Public Water Systems • Irrigation and Sprinkler Systems • Pump Booster Systems Double threaded end connections to simplify installation with pipe size flexibility. Standard models are equipped with single union end connection O.D. and female NPT threaded end connection I.D. Also available with threaded NPT O.D x NPT I.D. connection on both ends. Several other different end-connection and sizes are available. Features & Benefits • Globe Style Body • Lower Friction Loss • Un-Leaded Body • Replaceable internal cartridge • Corrosion Resistant internal Components • Field Adjustable Pressure Regulating Range • Vertical or Horizontal Installation • Reduces Electrical Consumption Materials Valve body: Un-leaded bronze Valve bell housing: UV Resistant Polymer Composite (1/2”, 3/4” & 1”) Cartridge Delrin™, NSF Listed Elastomers EPDM (FDA approved) Buna Nitrile (FDA approved) Spring and fasteners: Stainless steel Flomatic Corporation 15 Pruyn’s Island Drive, Glens Falls, New York 12801 Phone: 518-761-9797 Fax: 518-761-9798 High Quality Valves Buil

Product Operation The Flomatic Direct Acting Pump Control Valve Model C152E when properly installed will regulate high upstream (inlet pressure) to a lower regulated downstream (outlet pressure) constant pressure within a range regardless of water flow. This is accomplished by an adjustable spring loaded balancing valve factory set to automatically regulate the downstream pressure factory set at 50 psi. The regulating pressure is field adjustable. As the demand in the system lowers and the valve goes closed. Flow continues through an integral by-pass that allows the downstream pressure to build...