section Five | page 80 Flexible Impel ler Pumps There are probably few parts of the world where the ITT Jabsco family of products are not in use or where our brands are not known. The reason is simple: “Make good fit-for-purpose products and you will get a good name”. This new catalogue is designed to help you understand the basics a Flexible Impeller Pump (FIP), and supply you with a quick reference guide, enabling you to choose the correct pump for the application. The History. The Original Designed by Jack Streeter and Art Briggs Jack Art Briggs Streeter Company • To come up with the name Jabsco, these inventors used the first letter from each of their names and added the co, to be Jabsco. Jabsco pump company formed in Burbank, California • First pump designed in 1938 • The patent for the flexible impeller was issued in 1940. • Designed in response to a specific customer requirement for condensate removal from air conditioning systems. • The FIP principle has been applied to a diverse range of applications ranging from, engine cooling systems, bulk milk transfer, food processing, and industrial applications. Introductio n

section Five | page 81 Flexible IM pel ler Pumps Flexible Impeller Product Range Pressure: 0 – 60 PSI (0 – 4.13 Bar) Flow Rates: 0 – 185 GPM (0 - 700 LPM) Viscosity: 1 – 4000 Cp Voltages: 12/24 VDC, 115/230 – 60 / 50 Hz Impeller Materials: Neoprene, 3A Neoprene, Nitrile, 3A Nitrile, Viton, 3A EPDM Impeller Ratings: Standard, Medium, High Pressure Shaft Seals: Buna, Nitile, Viton Lip Seals, Mechanical Carbon-on-Ceramic, Tungsten Carbide Port Sizes: Hose Fitting, Internal - External NPT / BSP, Clamp, ACME Body: Epoxy, Phenolic, Bronze, Stainless Steel Pump Type: Pedestal, Close Coupled, Pump Head...

section Five | page 82 Flexible Impel ler Pumps Epo xy / Phe nolic Plastic Pumps 12560 Series Phenolic Plastic Flex Pump | FOR US MARKETS Specifications Open Flow 4.6 gpm (17.4 LPM) Voltage 12V DC Body Material Phenolic Impeller Material Neoprene Shaft Material Stainless Steel Shaft Seal Buna lip type Port Size 5/8" (15.9 mm) Hose Barb Motor PMDC, TENV, thermal overload protected, 7 amp nominal, 10 amp fuse Approvals Ignition protection Maximum Pressure 8.7 psi (20.1 bar), 20 ft. of water Prime Dry, Wet 1 - 2ft (.3-.6m), 2 - 4 ft (.6-1.2m) Liquid Temp. 45-160¢ªF (8-70¢ªC) Neoprene 50-180¢ªF (10-82¢ªC)...

section Five | page 83 Flexible IM pel ler Pumps Epo xy / Phe nolic Plastic Pumps 3010 Series Epoxy Pedesta l pump| FOR internatio nal MARKETS specifications Flow Rate 5 gpm (19 lpm) Body Phenolic Impeller Neoprene, Nitrile, Viton Shaft Stainless Steel Seal Lipseal Bearings PTFE /graphite Bracket Plated steel Ports 16mm OD for hose connections Weight 0.25kg MO DELS MODEL #S CE VOLTAGE IMPELLER STYLE 3010-1011 Yes N/A Neoprene Pedestal 12290 Series Phenolic Plastic Flex Pump | FOR US MARKETS Use where corrosion resistant phenolic or glass filled epoxy material, self-priming, and debris tolerance...

section Five | page 84 Flexible Impel ler Pumps 28250 Series Epoxy Head Kit & 28260 Series Pedesta l Pump FOR Internatio nal MARKETS Features • Self primes from dry up to 5.0 metres • Flows up to 70 liters per minute • Pressure up to 3.0 bar • Handles hard or soft solids - max. 5mm diameter • High chemical resistance Epoxy plastic • Non pulsating flow, proportional to speed • Handles viscosities up to 10,000 centiPoise • No metal parts in liquid contact • Fits IEC standard motor B3/B14, frame 80 (Model 28260) Specifications Seal Carbon / Ceramic mechanical face seal Optional Tungsten Carbide...

section Five | page 85 Flexible IM pel ler Pumps Epo xy / Phe nolic Plastic Pumps Features • Self primes from dry up to 5.0 metres • Flows up to 42.3 GPM (160 LPM) • Pressure up to 36.25 psi (2.5 bar) • Handles hard or soft solids - max. 1/5” (5mm) diameter • Tolerates abrasive wear - replaceable wearplate • Non pulsating flow, proportional to speed • Handles viscosities up to 4,000 centiPoise • Minimal shear to thixotropic fluids • Fits IEC standard motor B3/B14, frame 80 (Model 28360) Specifications Seal Carbon / Ceramic mechanical face seal Seal Elastomers Nitrile Pump Head Epoxy End Cover...

section Five | page 86 Flexible Impel ler Pumps Use where single or variable speed operation and Plastic Epoxy material is desirable. Self-priming, 8 gpm flow, debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional EPDM standard and high pressure impeller kits 7614-0002 and 8980-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Motor is not explosion proof. Do not run dry. For pumphead only models...

section Five | page 87 Flexible IM pel ler Pumps Use where single or variable speed operation and Plastic Epoxy material is desirable. Self-priming, 22 gpm flow, debris tolerant. Nitrile impeller is ideal for oil based products. Use Neoprene for water and general purpose pumping. Use Viton for hydrocarbons and most solvents. Optional EPDM standard and high pressure impeller kits 8981-0002 and 8840-0002 for hygienic applications and some keytone solvents. Use Tungsten Carbide seal when pumping highly corrosive or abrasive fluids. Motor is not explosion proof. Do not run dry. For pump head only...

section Five | page 88 Flexible Impel ler Pumps 17830 Reversible DC Wate r Puppy | FOR Internatio nal & US MARKETS Especially suited for viscous fluids and engine oil transfer where self-priming and 3 gpm flow is required. Pump oil from crankcase to storage container, and from storage container to waste container automatically using the manual flow reverse switch. No need to remove or re-attach hoses to reverse oil flow direction. Oil temperature should be 100-140¢ªF. Use 12V DC from vehicle battery. Do not run dry. Specifications Open Flow 3 gpm (11.4 lpm) Voltage 12V DC Body Material Bronze...