Catalogs >
FLOJET >
Oil Change & Diesel

Oil Change & Diesel
6Pages

Catalog excerpts

07 Oil Change & Diesel Transfer Pumps The Porta-Quick™ Portable Oil Changer makes quick, clean and easy oil changes onboard any boat because it uses the vessel’s own power supply to operate the powerful oil reservoir mounted flexible impeller pump. • 14 quart (13L) container easily handles two engines. • Pump is reversible to both drain and refill engine oil. • Sturdy bronze pump head. • High temperature resistant Teflon™ dipstick probe. • Non-collapsible thick wall suction hose. • Garden hose thread adapter included for dipsticks with GHT male threaded ends. • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). SIZE 15-5/8" high x 13-1/2" diameter (35cm x 34cm) Hose: 1/2" (13mm) ID x 48" (120cm) long Probe: 1/4" (6.5mm) OD x 40" (100cm) long Replacement Nitrile Impeller Teflon™ Probe

Open the catalog to page 1

Flat Tank Oil Changer System The Oil Change Pump is the same high-quality pump used in the Jabsco Multi-Engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process. Ideal for changing engine oil in boats, RVs, lawn and garden equipment. There is no need to worry about open containers causing spills when changing engine oils with the 3-1/2 gallon (13L) compact self-contained unit fitted with a self-priming diaphragm pump with an easy-pour spout for emptying. The Flat...

Open the catalog to page 2

07 Oil Change & Diesel Transfer Pumps OIL CHANGE PUMPS Permanent Oil Drain Hose Kit The Oil Change System consists of a robust, self-priming flexible impeller pump mounted to an easy-to-install base and coupled to a five-port manifold, factory fitted with three full-flow ball valves. The Jabsco Oil Drain Hose Kit includes a drain plug fitting, oil drain hose assembly, hose hanger and a cap. This kit provides an easy method of connecting to several pump types for neat and easy oil removal. • The system includes a pump reversing switch to pump used oil out and new oil in. • Reinforced...

Open the catalog to page 3

Handy Boy Utility Pump Slimline Pumps Versatile, polished brass multi-purpose hand pump. • Drain, fill or top off engine and gearbox oil. • Overcomes problem of hard-to-reach drain plugs and filler caps. • Oil- and corrosion-resistant brass neoprene construction with up to 1.5 GPM (6 LPM) output. • 1001 other uses on any boat. FITTING Connection for 1/2" (13mm) ID hose. Foot adapter for 1/2" (13mm) ID hose. One 1/2" (13mm) ID hose, one 5/16" (8mm) probe, one 1/4" (6mm) probe. DESCRIPTION Handy Boy Utility Pump Rule has developed a family of compact combination submersible and in-line pumps...

Open the catalog to page 4

07 Oil Change & Diesel Transfer Pumps Light duty, 30-minute-rated diesel pump. 7" long x 4-3/4" wide x 3-3/8" high (18cm x 12cm x 9cm) • 30' (9m) maximum total head. • Self-priming up to 3' (1m) vertical lift. • Duty Cycle: 30 minutes at 10' (3m) at 86°F (30°C). For service and spare parts listing, see page 229. • Rugged bronze pump head. • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection). Light duty, 30-minute-rated diesel pump with integral reversing switch. Sliding Vane 18680 — 6 GPM Reversible 8" long x 4-3/4" wide x 3-1/4" high (20cm x 12cm x 8cm) • 20' (6m) maximum...

Open the catalog to page 5

Sliding Vane VF040 Light duty diesel pump. 8" long x 5" wide x 6-1/4" high (20cm x 13cm x 16cm) • 22' (7m) maximum total head. 12V DC model, fitted switch • Self-priming up to 9' (2.8m) vertical lift. 24V DC model, fitted switch • 22°F (-30°C) to 104°F (+40°C) operating temperature range. For service and spare parts listing, see page 229. • 30 minutes at 10' (3m) at 86°F (30°C). • IP55 and thermally protected motor. • Integral switch fitted as standard. • Accessories available. • ISO 8846 MARINE (Ignition Protection). Sliding Vane VF060 Continuously rated, diesel pump. • 20 GPM (68 LPM) at...

Open the catalog to page 6