1. Catalogs
  2. FLIR SYSTEMS
  3. Thermal imaging cameras for optical gas imaging

Thermal imaging cameras for optical gas imaging

Thermal imaging cameras for optical gas imaging
1 / 28 PagesView full catalog

Thermal imaging cameras for optical gas imaging

Product catalog summary
Introduction to FLIR Thermal Imaging Cameras
FLIR is a prominent manufacturer of thermal imaging systems used in various sectors such as commercial, industrial, and governmental applications. These systems use infrared technology to detect heat and create images based on temperature differences, providing accurate temperature readings through advanced algorithms.
Manufacturing and Market Presence
FLIR operates six manufacturing plants globally, employing over 3,200 people and generating an annual turnover exceeding 1 billion USD. It is the largest producer of commercial thermal imaging cameras worldwide.
Infrared Technology Overview
Infrared cameras detect energy emitted by objects, converting it into images viewable on screens. Infrared radiation, primarily emitted as heat, is part of the electromagnetic spectrum and invisible to the human eye. Thermal imaging transforms these infrared images into radiometric ones, allowing for temperature readings.
Advantages of FLIR Thermal Imaging Cameras
FLIR cameras offer comprehensive scanning capabilities, detecting gas leaks and temperature anomalies over large areas without direct contact, enhancing safety and efficiency by reducing the need for extensive manual inspections.
Applications in Gas Leak Detection and Safety
FLIR cameras are essential in detecting gas leaks, especially in petrochemical facilities, where they can identify leaks from a safe distance, improving operator safety and environmental protection.
Furnace and Boiler Inspections
FLIR cameras, particularly the GF309 model, are equipped with flame filters to see through flames and measure high temperatures, making them ideal for inspecting industrial furnaces and boilers.
Features of FLIR GF-Series Cameras
The GF-Series cameras are designed for extended use, featuring high sensitivity, ergonomic design, and multiple analysis tools. They offer wireless connectivity, GPS, and the ability to stream radiometric IR video.
Overview of FLIR Gas Imaging Cameras
FLIR GF304: Detects refrigerant gases in industrial refrigeration systems, operating in the 8.0-8.6 micrometer waveband.
FLIR GF306: Detects SF6 and ammonia, operating in the 10.3-10.7 micrometer waveband.
FLIR GF320: Designed for VOCs detection, operating in the 3.2-3.4 micrometer waveband.
FLIR GF346: Focuses on CO and other harmful gases, operating in the 4.52-4.67 micrometer waveband.
Software and Training
FLIR Reporter software allows for professional report generation, and the FLIR Tools Mobile app provides Wi-Fi connectivity for remote control and image capture. The Infrared Training Center (ITC) offers courses for enhancing knowledge of IR technology and camera operation.
After Sales Support
FLIR Systems provides a global service network for maintenance and support, ensuring long-term reliability of thermal imaging cameras.
Technical Specifications
  • Imaging and Optical Data: Field of view of 14.5° or 24°, thermal sensitivity of <15 mK at +30°C, automatic and manual focus options.
  • Measurement: Temperature range from -40 to +1500°C with an accuracy of ±1°C or ±2% of reading.
  • Storage and Recording: Images stored on removable SD cards, with video recording options.
  • Power System: Rechargeable Li-Ion battery with over 3 hours of operating time.
  • Environmental Data: Operating temperature range from -20°C to +50°C, with IP54 encapsulation.
Accessories and Connectivity
  • Micro-SD Card: For data storage.
  • USB Cable: Connects the camera to a computer.
  • HDMI Cables: Connects the camera to an external display.
Transport and Protection
  • Hard Transport Case: For FLIR GF3xx-Series cameras.
  • Heat Shield: Specifically for the FLIR GF309 model.
Wireless Connectivity
  • Wi-Fi USB Adaptor: Enables wireless connection between the camera and external equipment.
Export Licensing and Specifications
  • All FLIR GF-Series cameras can be equipped with either a 14.5° or 24° fixed lens. Interchangeable lenses require a US Department of State License.
  • Government authorization may be required for export/re-export or transfer of products.
Contact Information
  • FLIR France, Advanced Thermal Solutions, Croissy-Beaubourg, France
  • FLIR Commercial Systems AB, Meer, Belgium
  • FLIR Systems Sweden, Danderyd, Sweden
  • FLIR Systems UK, West Malling, United Kingdom
  • FLIR Systems Germany, Frankfurt am Main, Germany
  • FLIR Systems Italy, Limbiate, Italy
  • FLIR Systems Spain, Alcobendas, Spain
  • FLIR Systems, Middle East FZE, Dubai, UAE
  • FLIR Systems Russia, Moscow, Russia
See more

Catalog excerpts

Thermal imaging cameras for optical gas imaging-1

Thermal imaging cameras for optical gas imaging (OGI) and furnace inspections Detect gas leaks Protect the environment See through flames Increase safety

 Open the catalog to page 1
Thermal imaging cameras for optical gas imaging-3

FLIR: The world leader in thermal imaging cameras FLIR is the world leader in the design, manufacturing and marketing of thermal imaging systems for a wide variety of commercial, industrial and government applications. FLIR thermal imaging systems use state-of-the-art infrared imaging technology that detects infrared radiation - or heat. Based on detected temperature differences, thermal imaging cameras can create a crisp image. Advanced algorithms also make it possible to read correct temperature values from this image. We design and manu­acture all of the f critical technologies inside our...

 Open the catalog to page 3
Thermal imaging cameras for optical gas imaging-4

INFRARED: more than meets the eye Infrared - part of the electromagnetic spectrum Our eyes are detectors that are designed to detect visible light (or visible radiation). There are other forms of light (or radiation) that we cannot see. The human eye can only see a very small part of the electromagnetic spectrum. At one end of the spectrum we cannot see ultraviolet light, while at the other end our eyes cannot see infrared. Infrared radiation lies between the visible and microwave portions of the electromagnetic spectrum. The primary source of infrared radiation is heat or thermal radiation....

 Open the catalog to page 4
Thermal imaging cameras for optical gas imaging-5

Why use thermal imaging cameras? Why would you choose a FLIR thermal imaging camera? There are other technologies available to help you find gases and measure temperatures in a non-contact mode. Gas sniffers and infrared thermometers for example. Gas sniffers versus thermal imaging cameras In a complex petrochemical facility there may be many thousands of potential leak paths. Some may be leaking but most will not. Conventional leak detection equipment such as a Volatile Organic Compound meters (or sniffers) mean that the operator must visit and test each potential leak site. Each item must therefore...

 Open the catalog to page 5
Thermal imaging cameras for optical gas imaging-6

Thermal imaging cameras for optical gas imaging (OGI) and seeing through flames A thermal imaging camera for optical gas imaging visualizes and pinpoints gas leaks without the need to shut down the operation. The portable camera also greatly improves operator safety, by detecting gases at a safe distance, and helps to protect the environment by tracing leaks of environmentally harmful gases. Captured gas leak from production site. Many chemical compounds and gases are invisible to the naked eye. Yet many companies work intensively with these substances before, during and after their production...

 Open the catalog to page 6
Thermal imaging cameras for optical gas imaging-7

Thermal imaging cameras for OGI: • Give you a full image of the situation • Perform inspections when systems are under load • Find the problems before real problems occur • Save you valuable time and money • Identify and locate the problem • Tell you exactly what needs to be fixed • Increase the worker safety • Protects the environment • Are as easy to use as a camcorder or a digital camera • Measure temperatures • Store information Seeing through flames A wide variety of industries relies on furnaces and boilers for manufacturing processes. But furnace and boiler equipment is prone to failures...

 Open the catalog to page 7
Thermal imaging cameras for optical gas imaging-8

FLIR GF-Series Ergonomically designed and full featured All FLIR GF-Series thermal imaging cameras are designed to be used several hours per day. They all contain a number of useful features that will help you to do your inspections more efficiently and to detect the smallest of gas leaks or thermal anomaly. High sensitivity The GF-Series allow you to see temperature differences as small as 0.015°C. Ideal for detecting the smallest anomalies in electrical or other industrial installations. Tiltable viewfinder The high-resolution viewfinder is tiltable and can be adapted to the individual user....

 Open the catalog to page 8
Thermal imaging cameras for optical gas imaging-9

Connect to smartphone or tablet via a Wi-Fi USB adapter and use the FLIR Tools mobile app (Apple iOS and Android) for processing and sharing results as well as for remote control. Temperature range button Programmable direct access button Tiltable viewfinder Laser pointer High quality digital camera and video lights Multi-angle handle IR-lens Laser button Manual focus ring Toggles between thermal imaging mode and digital camera mode Mode wheel • Camera mode: save images • Video mode: record video clips and sequences • Archive mode: view saved images, video clips and sequences • Program mode:...

 Open the catalog to page 9
Thermal imaging cameras for optical gas imaging-10

FLIR GF309 Seeing through flames The FLIR GF309 is an IR camera for the high-temperature measurement of industrial furnaces, chemical heaters, and coalfired boilers, without the need to shut down the operation. The portable camera also greatly improves operator safety, by measuring through flames at a safe distance, for all types of furnaces. A good knowledge of the furnace condition can avert failures and unscheduled shutdowns. Industrial furnaces, heaters, and boilers are found in the chemical, petrochemical, and utility industries. See through flames The GF309 is equipped with a special “flame...

 Open the catalog to page 10
Thermal imaging cameras for optical gas imaging-11

FLIR GF304 Optical gas imaging of refrigerant gases The FLIR GF304 is a gas imaging camera which was especially developed for the detection of refrigerant gases without the need to shut down the operation. Refrigerant gases are used worldwide in industrial refrigeration systems for production, storage and retailing of food. Refrigerant gas is also used in the chemical, pharmaceutical and automotive industries and in air conditioning systems. Keeping an industrial refrigeration system running is of great importance due to the value of the cooled goods. Furthermore, replacing or recharging gas...

 Open the catalog to page 11
Thermal imaging cameras for optical gas imaging-12

FLIR GF306 Optical gas imaging especially of SF6 and ammonia The FLIR GF306 visualizes and pinpoints gas leaks of SF6 and ammonia, without the need to de-energize high-voltage equipment or shut down the operation. The portable camera also greatly improves operator safety, by detecting emissions at a safe distance, and helps to protect the environment by tracing leaks of environmentally harmful gases. SF6 is used in the electric power industry as an insulator and quenching medium for gas-insulated substations and circuit breakers. Ammonia is produced in ammonia plants, and is used mainly for the...

 Open the catalog to page 12
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.