• Product Specifications: The catalogue lists various products such as ball bearing rollers, needle rollers, rod ends in steel or stainless steel, and linear modules. Each product type is associated with specific catalogues (GLF-1A, GLF-1P, GLF-1M, GLF-1R) that detail their specifications and applications.
• Quality Assurance: The company highlights its dedication to maintaining high-quality standards through regular product inspections and compliance with current norms. It also mentions the traceability of products and technical support for application-specific solutions.
• Technical Appendices: Detailed technical information is provided, including threading specifications, permissible tilting angles, lubrication requirements, temperature ranges, and material specifications. The appendices also cover load indices, dynamic and static load calculations, and guidelines for selecting appropriate bearing sizes.
• Material Specifications: A comprehensive table lists materials used in the products, with corresponding international standards and temperature ranges for different friction pairs.
• Load and Stress Calculations: The document provides formulas and tables for calculating dynamic and static loads, stress factors, and permissible pressures, aiding in the selection of suitable components for specific applications.

• Lubrication and Temperature: Recommendations for lubrication types and intervals are provided, depending on the material and operational conditions. Specific lubricants are suggested for different temperature ranges.
• Material and Temperature Compatibility: The document outlines the temperature limits for various material combinations, ensuring the selection of components that can withstand specific environmental conditions.
• Load Indices: Static and dynamic load indices are explained, with guidelines for calculating permissible loads and selecting components based on operational demands.

• Admissible sliding speeds and specific bearing power for different material combinations.
• Factors affecting load direction, temperature, and sliding for lifespan estimation.
• Dimensions and load capacities for various rod end types and sizes.

• Free-Cutting Steel: Types include C22 and C45, with special high-strength bronze inserts and 100Cr6 bearing steel balls.
• Maintenance-Free Rod Ends: Made from heat-treated 42CrMo4 steel with PTFE liners, suitable for high pressure and tension loads.
• Stainless Steel Rod Ends: Constructed from AISI431 and AISI316Ti stainless steel, designed for corrosive environments and high dynamic loads.

• High-speed applications for free-cutting steel rod ends.
• High pressure and tension loads for maintenance-free and stainless steel rod ends.
• Corrosive environments for stainless steel rod ends.

• Detailed tables provide dimensions, basic load capacities, limiting speeds, and weights for each type of rod end.
• Specific models are listed with their respective technical specifications.

• Special manufacturing available upon consultation based on client specifications and plans.
• A wide range of quality products and a significant stock are maintained.

• Low noise and reduced friction torque with RZ seals.
• Highly effective RS seals against dust.
• High-quality machining of raceways.
• Long lifespan and maximum speed of 10 m/s.
• Wide operating temperature range from -35 to 120°C.
• High load capacity and lifetime lubrication.

The LRG roller is a high-performance and reliable product with low vibrations and excellent sealing, thanks to years of expertise in precision roller development and manufacturing.

Details on the FEA are not provided, but it is mentioned as a part of the technical analysis.

The document provides detailed specifications for various types of rollers and bearings, including dimensions, load capacities, and material types. It includes tables with measurements and load ratings for different models, such as LFZ and LFE series, and their corresponding applications.

1. Application: General sales conditions are provided to every buyer, and placing an order implies full acceptance of these conditions.
2. Orders: Orders are firm and final, requiring written agreement for modifications. Standard length orders may have a delivery tolerance of +/-10%.
3. Prices: Prices are subject to change without notice and are exclusive of taxes and packaging.
4. Delivery Times: Deliveries are prepared based on availability and order receipt. Delays do not warrant damages or cancellation.
5. Transport Costs: Products are delivered at the buyer's risk, and any discrepancies must be reported immediately.
6. Return of Goods: Returns must be agreed upon in writing within 8 days of delivery, with specific conditions for acceptance.
7. Claims: Claims must be made within 8 days of receipt, with the buyer bearing transport costs for returns.
8. Payment Terms: Minimum order is 40 euros, with payment upon invoice receipt. Payment terms vary based on account status.
9. Late Payment: Late payments may result in order suspension and additional charges.
10. Non-Payment: Non-payment results in immediate demand for all outstanding amounts and potential account blocking.
11. Retention of Title: Ownership transfers only after full payment.
12. Disputes: Disputes are subject to French law and the jurisdiction of the Tribunal of Vienne.

The document also lists various precision components and services offered by France Linéaire Industrie, including precision shafts, ball bearings, and linear systems.