This unit is designed for the automatic treatment and handling of waste water with emulsified hydrocarbons, particulate matter, dyes, inks, etc. The unique design allows for total integration with any of the units in the Flexo Wash line, to further enhance full automation in cleanup and waste management. An automatic controlled pump, feeds the waste water into the reactor of the Split-O-Mat plant. When the reactor is full, the mixer is put into operation by adding the splitting agent ENVIFLOC® 1010 a blend of balancing minerals and chemicals. The waste water is flocculated with the contaminants clinging to the minerals to create a filterable matter. The water/sludge mixture drains through the filter paper as it rolls along on a conveyor, which is triggered into action automatically as needed. 6) Liquid Volume Processed Required Power Operating Costs The waste water is collected in a buffer tank. The water is discharged into the drainage system, while the sludge water is deposited into a container, for later disposal in landfill or incinerator. This product is essential in plants where waste by-products are driving up the cost of production. It is also a superb compliment to the closed-loop cleaning systems designed by Flexo Wash. Grenåvej 631 K • 8541 Skødstrup • Denmark • tel.: +45 86 99 36 31 • fax: +45 86 99 13 43 www.flexowash.com • [email protected]