Waste Water Treatment Plant for manually controlled treatment of water, polluted with hydrocarbons, impurities, paint or printing ink. A mixer is activated and the splitting agent, ENVIFLOC® 1010, is added. The splitting agent is a mixture of calcium, aluminium sulphate and reaction substances. The flocculation process will bind the particles into larger sludge particles which can be caught in a filter. The mixer stops manually and after some time of sedimentation, water and sludge is led into filter bag. The water is pumped into the reactor tank which contains approx. 75 L. Dimensions Capacity Required power Splitting agent The polluted water is collected in a bulk after having passed an oil separator if necessary. 2) The plant is suitable where polluted water reaches an average of up to approx. 150 liters/day. The operation is simple and quick. The sludge will gather in the filter bag, where it will dry up after some time so it can be discharged as solid water. The clean water running out of the bag can be led into the drain. 5-15 g/l (depending on pollution load) The plant is very useful to avoid leading polluted water to the surroundings and where discarding costs are high. The plant is a perfect supplement to the closed-circuit washing units designed by Flexo Wash. Grenåvej 631 K • 8541 Skødstrup • Denmark • tel.: +45 86 99 36 31 • fax: +45 86 99 13 43 www.flexowash.com • [email protected]