Leading Cleaning Technology Anilox Roll Cleaners The fully automatic anilox roll cleaners are designed to deep clean/restore anilox rolls, sleeves or gravure cylinders of all sizes. Further more it is also a very good tool for the daily washing and maintenance of rolls. The Flexo Wash system is based on liquid and high-pressure water. Therefore the system is effective even for high line aniloxes. The quick and gentle cleaning process leaves the rolls totally clean and ready for immediate use after just 10-20 minutes cleaning without causing any wear or tear to the roll. This makes it possible to keep your anilox rolls totally clean at all times ensuring a high and consistent print quality and a long lifetime of the anilox rolls. The Anilox Roll Cleaner is an advanced machine, which can be operated by all types of personnel. It does not require a profound knowledge to operate the machine. The FW Anilox Roll Cleaners meet your cleaning needs: The different models and sizes offer various options but all have these common characteristics: The roll gets absolutely clean - No wear or tear on roll - Quick and easy to use The units are also very adequate for cleaning sleeves or plates. A complete range of sleeve adapters and plate drums are available. Furthermore it is also possible to equip the unit, so it can wash gravure cylinder with heavy layers of inks on the shafts. The machine will then have larger pumps, brushes and extra nozzles. Watch video here: • Designed for All Ink Types • Recirculation/Re-use of Liquid • Short Washing Time • Harmless to the Rolls • Cell Volume Completely Restored • Safe and Easy Washing • Stainless Steel

Leading Cleaning Technology Quick and Efficient Cleaning: The water from the high pressure rinse is automatically led directly to the drain, to a tank for re-use or to one of our water treatment units. The water consumption is only 10 litres for each roll meter. 1. Place the roll in the machine, close the lid and press start. 2. The roll rotates while cleaning liquid is sprayed on it. 3. At the end of the wash cycle liquid is drained back to tank for re-use. 4. High pressure water is spayed on the roll removing all ink residues and cleaning liquid. 5. An air stream blows off excessive water....