System information Examples of application areas Small ball bearings, perfume bottles, pharmaceutical bottles, sintered metal components. Technical characteristics Features Chain permits transport of very small items which are otherwise difficult to handle. Compact and neat design. System information

Plain chain Plain chain Plain chain (Ultra low wear) Plain link kit (Ultra low wear) Note. Link kit contains 10 links, 10 pivot, 10 steel pins. Cleated chain, Type D Cleated chain Type D, Use the online configurator to specify and order. Note. Link kit contains 10 links, 10 pivot, 10 steel pins. Cleated chain (flat top cleats) Cleated chain Note. Link kit contains 10 links, 10 pivot, 10 steel pins. Other chains See the Chain guide for selection of other chains. Chain installation See Appendix "D. Chain installation" on page 471, Cleated chain, Type G Cleated chain Type G Use the online configurator...

Plastic pivot for chain Pin insertion tool for chain XKP X180 Pin insertion tool XS-X65-XT XS-X65-XT, PRO version This product is recommended for frequent users.

Beam XS Conveyor beam 45 Beam Length 3 m (3030 ±5 mm) Length to order (30- 3000 mm) Slide rail: see page 103 Beam accessories XS Connecting strip with set screws Beam spacer Connecting strip with set screws h=20, a=30, b=50, L=130 Note. Must be ordered in multiples of 10 Cover strip for T-slot, PVC Beam spacer Aluminium, anodized Length 3 m Cover strip for T-slot, PVC Length 25 m For XS-X65-XH For connection of two conveyor beams side to side. Use M8 screw and slot nut. Two holes must be drilled, one through the spacer (9 mm) and one through the beam, to allow insertion of the screw. The diameter...

Plastic slide rails for XS beam XSCR 25 Rivet crimping clamp Slide rail Length 25 m HDPE (μ=0,1–0,25) (Black) PVDF (μ=0,15–0,35) (Natural white) UHMW-PE (μ=0,1–0,25) (White) PA-PE (μ=0,1–0,25) (Grey) Rivet crimping clamp for XS For 3 mm rivets Cover strip Mounting tool for slide rail Mounting tool for slide rail XS, X65 XLMR 140 Aluminium rivets Aluminium rivets 3 mm for XS conveyors Extra slide rail in plain bends must be anchored using plastic screws due to lack of space for the rivet crimping tool. Note. Must be ordered in multiples of 250. Drill fixture for slide rail Cover strip Length:...

Drive and idler units – introduction Drive unit types Dimension drawings in catalogue The XS system includes several configurations, including direct driven units with suspended motor and transmission chain as well as drive units. Available motors include variable speed types (V) as well as fixed speed motors (F). Note that dimensions relating to drive unit motors depend on the motor specified during the configuration. In most cases, the motors shown in the catalogue drawings represent the largest size. If variable speed motors are used, some dimensions may increase, indicated by dimension values...

End drive unit, suspended motor, slip clutch 80 End drive unit, suspended motor, slip clutch 80 End drive unit Fixed speed up to 60 m/min Transmission on left side Fixed speed Without motor (ISO) Without motor (ANSI) XSEB XSEB 0 HL XSEB 0 HLA Maximum traction force: 500 N. See page 23. Use online configurator when ordering. Effective track length: 0,80 m End drive unit Fixed speed up to 60 m/min Transmission on right side Fixed speed Without motor (ISO) Without motor (ANSI) XSEB XSEB 0 HR XSEB 0 HRA Maximum traction force: 500 N. See page 23. Use online configurator when ordering. Effective track...

Double drive units XS Double drive unit, suspended Double drive unit, suspended A Double drive unit Fixed speed up to 60 m/min Transmission on left side A = 55 mm Fixed speed Without motor (ISO) Without motor (ANSI) A = 90–350 mm Without motor (ISO) Without motor (ANSI) XSEB DD XSEB 0 HLD55 XSEB 0 HLAD55 XSEB 0 HLD– XSEB 0 HLAD– Maximum traction force: 500 N. See page 23. Use online configurator when ordering. Effective track length: 0,80 m Double drive unit Fixed speed up to 60 m/min Transmission on right side A = 55 mm Fixed speed Without motor (ISO) Without motor (ANSI) A = 90–350 mm Without...

Effective track length: 0,25 m 1-way (0,50 m 2-way) Effective track length: 0,40 m 1-way (0,80 m 2-way) Effective track length: 0,30 m 1-way (0,60 m 2-way) Effective track length: 0,65 m 1-way (1,30 m 2-way) XSBP 30R500 XSBP 30R700 XSBP 30R1000 XF XD XSBP 45R500 XSBP 45R700 ELV XSBP 45R1000

Plain bends XS (continued) Plain bend, 60° XSBP 60R500 XSBP 60R700 XSBP 60R1000 XSBP 90R500 XSBP 90R700 XSBP 90R1000 Vertical bends XS Vertical bend, 5° Effective track length: 0,20 m 1-way (0,40 m 2-way) Effective track length: 0,35 m 1-way (0,65 m 2-way) Effective track length: 0,22 m 1-way (0,44 m 2-way) Effective track length: 0,45 m 1-way (0,80 m 2-way)

Vertical bends XS (continued) Effective track length: 0,50 m 1-way (0,95 m 2-way) Effective track length: 0,70 m 1-way (1,30 m 2-way) The bend is cut in the middle to the desired angle and assembled using connecting strips. The angle “E” must be specified when ordering.

Front piece Front piece Sliding strip for front piece Sliding strip for front piece The sliding strip must be anchored to the front piece. Rivets and tools for anchoring: see page 103. Front piece upper bend Upper bend, 60° XSVA 60R352 Includes connecting strip with screws Linkage kit for front piece Kit includes two support pairs and one locking device. Bend support for front piece Bend support Front piece lower bend Lower bend, 60° XSVB 60R245 Includes connecting strip with screws