System information Examples of application areas Tissue paper, gear wheels, aerosol cans, medium size ball bearings, piston parts, yoghurt, fuel injectors, dry batteries, plastic bottles, matches, cheese boxes, coffee and tea packages. *Applies to vertical wedge conveyor. Maximum permitted load per link 1,5 kg Suitable for a wide range of applications. Preferable in high speed applications. Includes components for pallet handling and vertical wedge conveyors. System information

Plain chain Plain chain Plain chain (Ultra low wear) Plain link kit (Ultra low wear) *Link kit contains 10 links, 10 pivots, 10 steel pins Cleated chain Type A Type A cleats, Length 5 m Use the online configurator to specify and order. * Link kit contains 10 links, 10 pivots, 10 steel pins Cleated chain Type B Cleated chain, Length 5 m XLTF 5A65X12 B Use the online configurator to specify and order. *Link kit contains 10 links, 10 pivots, 10 steel pins Cleated chain Type C *Use the online configurator to specify and order. **Link kit contains 10 links, 10 pivots, 10 steel pins Flat friction top...

Flexible cleat chain, Type C Flexible cleat chain Type C Flexible cleat link kit Flexible cleat chain, Type D Length 5 m (PARI) XLTR 5A65 Use the online configurator to specify and order. Link kit contains 10 links, 10 pivots, 10 steel pins Flexible cleat chain Type D Flexible cleat link kit Use the online configurator to specify and order. Link kit contains 10 links, 10 pivots, 10 steel pins Link kit contains 10 links, 10 pivots, 10 steel pins

Chain accessories X65 Plastic pivot Pin insertion tool for chain X65MJ 4 Plastic pivot kit contains 25 items Pin insertion tool X65 X65 PRO version* *This product is recommended for frequent users. Note. kit contains 25 pcs of XTTD 4,5x30 Beams X65 Conveyor beam Beam Length 3 m (3030 ±5 mm) Length to order (30- 3000 mm) Slide rail: see page 116. Beam accessories: see page 115. The beams have predrilled 8 mm holes Beam section for chain installation Profile for split conveyor beam 65 Profile for split conveyor beam Length 3 m (3030 ±5 mm) Length to order (30- 3000 mm) Beam section for chain installation...

Beam spacer Beam spacer Aluminium, anodized Length 3 m For connection of two conveyor beams side to side. Use M8 screw and slot nut. Two holes must be drilled, one through the spacer (9 mm) and one through the beam, to allow insertion of the screw. The diameter of the second hole depends on the size of the screw head. Articulated beam section XT Connecting bracket kit with set screws XLCJ A65 Articulated beam section vertical Cover strip for T-slot, aluminium Tools for conveyor beam 11,8 Drill fixture Cover strip for T-slot Aluminium, anodized Length 2 m Cover strip for T-slot, PVC For the Connecting...

Slide rails X65 Plastic slide rails, narrow Plastic screws for slide rail Slide rail Length 25 m HDPE (Black) PA-PE (Grey) PVDF (Natural white) PE-UHMW (White) PE-UHMW conductive (Black) Plastic screws 5 mm for XS-X65-X85XH-X180/X300 beams XLAG 5 XLCR 25 XLCR 25 H XLCR 25 P XLCR 25 U XLCR 25 E See mounting instruction “Anchoring slide rail using plastic screws” on page 466 Note. Must be ordered in multiples of 50 Drill fixture for slide rail Plastic slide rails for X65 Slide rail Length 25 m HDPE (μ=0,1–0,25) (Black) PA-PE (μ=0,1–0,25) (Grey) Drill fixture for X65-X85-XH-XKX180/X300 slide rail...

Slide rails X65, hardened steel Steel slide rail, straight Mounting tool for steel slide rail Slide rail, hardened steel Length 3 m Delivered with 9 predrilled holes Steel slide rail for wheel bends Cover strip Slide rail for bends, hardened steel Slide rail for bend, X65 30° XLCR W30 TH Slide rail for bend, X65 45° XLCR W45 TH Slide rail for bend, X65 90° & 180° XLCR W90 TH 180°: Use 2 pieces of steel slide rail 90° Stainless steel rivets Cover strip Length: 3 m Material: Plastic PA 12 Cover the opening on the side between the chain and beam. Primarily for straight sections and the outer curves,...

Drive and idler units – introduction Drive unit types Motor specifications The X65 system includes Compact (C), Medium (M), and Heavy (H) drive units. Drive unit capacities range from maximum 1000 N for the H types down to maximum 200 N for the Wheel bend drive and Intermediate drive type M. The actual capacity depends on the speed and type of drive unit. Several configurations are available, including direct driven units with or without slip clutch. Heavy duty drives with suspended motor and transmission chain can also be ordered. Available motors include variable speed types (V) as well as...

End drive units X65 Type H, direct drive, with slip clutch End drive unit, Type H, direct drive with slip clutch End drive units X65 Type C, direct drive, no PO slip clutch CC End drive unit, Type C, direct drive, no slip clutch End drive unit, max 1000 N Fixed speed up to 60 m/min Variable speed up to 120 m/min Motor on left side Fixed/variable speed* Without motor Motor on right side Fixed/variable speed* Without motor XLEB A65 XLEB 0A65HLP XLEB A65 XLEB 0A65HRP Effective track length: 0,80 m ‘Use online configurator when ordering. Maximum traction force: see diagram on page 23 in FlexLink’s...

End drive units X65 Type M, direct drive, no slip clutch End drive unit, Type M, direct drive, no slip clutch End drive units X65 Type H, direct drive, no slip clutch End drive unit, Type H, direct drive, no slip clutch 411 End drive unit, max 700 N Fixed speed up to 60 m/min Variable speed: up to 60 m/min Motor on left side Fixed/variable speed* XLEB A65 Without motor XLEB 0A65MNLP Motor on right side Fixed/variable speed* Without motor Effective track length: 0,55 m *Use online configurator when ordering. Maximum traction force: see diagram on page 23 in FlexLink’s product catalogue. End drive...

Drive units for wedge conveyors End drive unit, Type H, guided chain, no slip clutch End drive unit, Type H, guided chain, slip clutch End drive unit, max 1000 N Direct drive with guided chain. No slip clutch. Fixed speeds up to 60 m/min. Variable speed up to 60 m/min. Motor on left side: End drive unit, max 1000 N Direct drive with guided chain. Adjustable slip clutch. Maximum traction force: up to 1000 N. Fixed speeds up to 60 m/min. Variable speed up to 60 m/min. Motor on left side: Fixed/variable speed * Without motor Fixed/variable speed * Without motor Motor on right side (not shown): Fixed/variable...