System information Conveyor with focus on robustness and cleanliness Improved cleanliness conveyor The stainless steel conveyor X180X was designed to suit the requirements of food and packaging applications: The X180X conveyor system has been evaluated based on field experience and suggestions from customers. With focus on structure rigidness and robustness, easy design, and easier cleaning, several components have been improved with features like better drainage and smaller contact surfaces. Noise level at 60 m/min is 68 dBA or less Technical characteristics Drive unit capacity Chain tension limit Beam width Chain width Chain pitch Item width Maximum item weight Maximum weight on conveyor Maximum conveyor length System information

Conveyor chain Chain accessories Pin insertion tool for chain 3 7 Plain chain Length 3 m * Link kit contains 10 links, 10 pivots, 10 steel pins Pin insertion tool X85-X180/X300 X85-X180/X300-XH, PRO version* *This tool is recommended for frequent users Steel pin Stainless steel Friction top chain Length 3 m Plastic pivot for chain XBTP 3A175 FP Use the online configurator to specify and order. Friction top link kit * * Link kit contains 10 links, 10 pivots, 10 steel pins Plastic pivot kit Spare parts kit, 25 pcs Other chains See the Chain guide for selection of other chains. Conveyor chain

Conveyor beams Conveyor beam, 180 mm Conveyor Beam Length 3 m (3030 ±1,5 mm) Length to order (150- 2999 mm) Connecting bracket kit Stainless steel Connecting bracket kit for X180X All X180X beams are delivered fully assembled. Including screws. The beams have predrilled 10 mm holes, see XBCBX 3A85 Conveyor beam type Y, 180 mm Beam section for chain installation Conveyor Beam Length 3 m (3030 ±1,5 mm) Length to order (150- 2999 mm) All X180Y beams are delivered fully assembled. Screw Kit 5114562 included Beam section for chain installation. XBCCX 300A180 Including 2 Connecting bracket kit XBCJX...

Conveyor beams (continued) Nut with threaded hole (M8) for connection of sensors and other accessories when the conveyor chain is in place. By placing nuts inside the beam at the holes, accessories can be attached using M8 A4 screws. NOTE! Be careful when installing so no nut is dropped inside the beam, this can lead to a large additional work 50 Conveyor beams © Flex Link"

Slide rails Plastic slide rails, narrow Drill fixture for slide rail ∅ d mm Slide rail Length 25 m HDPE (Black) PE-UHMV (White) PVDF (Transparent white) PA-PE (Grey) (Should not be used in wet applications) XBCR 25 XBCR 25 U XBCR 25 P XBCR 25 H Drill fixture for slide rail d=4,2 mm Rivet crimping pliers Plastic slide rails, wide Slide rail Length 25 m HDPE (Black) PE-UHMV (White) PVDF (Transparent white) PA-PE (Grey) (Should not be used in wet applications) Rivet crimping pliers For 4 mm rivets XBCR 25 B XBCR 25 UB XBCR 25 PB XBCR 25 HB Rivet crimping clamp Note. The wide slide rails are not...

Tools for conveyor beam Drill fixture Drill fixture For use when additional holes are needed on the beam Twist Drills DIN 338 HSS-E (Co 8) Type N-HD Cobalt Alloyed, Split Point For high strength alloys on CrNibase such as Hastelloy, Inconel, Monel, Nimonic, stainless steels, head and acid-proof steels (up to 1400 N/mm2 tensile strength). Tools for conveyor beam

Drive and idler units - introduction Drive unit types The X180X system drive unit capacities is maximum 1250 N. The actual capacity depends on the speed. Available motors include variable speed types (V) as well as fixed speed motors (F). Motor specifications or 330/575 V, 60 Hz. Variable speed motors are SEW Movimot, 380-500 V. Note that variable speed motors include a control box that adds 93 mm to the width of the IP class 65 and available with standard oil and food Idler unit types XLX Idler units are available in two versions, Compact and Standard. xssx Ordering information Drive units with...

Drive units – configuration strings Below, two examples of text strings obtained from the configurator with explanations are presented. Drive unit with fixed speed motor Drive unit with variable speed motor Item no - Drive type XBEBX: H – Motor power ... kW: Motor power, kW (position is omitted for variable speed motors see position F) No: No thermal protection TF: Thermal protection type TF TH: Thermal protection type TH (position is omitted for variable speed motors) C – End drive with guided chain G: Guided (position is omitted for non-guided) J – Hybrid cable No: No hybrid cable C: Hybrid...

End drive units End drive unit, direct drive, no slip clutch End drive unit, guided chain, no slip clutch End drive unit Direct drive with guided chain. No slip clutch. Maximum traction force: up to 1250 N. Maximum speed 80 m/min for X180X. PO Motor on left side: End drive unit Direct drive. No slip clutch. Maximum traction force: up to 1250 N. Maximum speed 80 m/min for X180X. Fixed/variable speed * Without motor Motor on right side (not shown): Fixed/variable speed * Without motor Motor on left side: Fixed/variable speed * Without motor Motor on right side (not shown): Fixed/variable speed...

Idler units Idler end unit Idler end unit, Compact 25 Idler end unit, compact X180X Effective track length: 0,70 m. Effective track length: 0,35 m. Protective cover for Idler end Protective cover for Idler end, Compact 203 180 Protective cover for Idler end unit XBEJX A180 Protective cover for Idler end unit XBEJX A180 S XBSJX A180 S Note! Always use pinch point protective cover for idler ends to protect persons from clamp risk. Idler units

Bridges, drive unit to idler unit Bridge, idler compact to drive unit 158 Including roller bridge and mounting hardware. Suitable for connecting idler compact to drive unit. Bridge, idler to drive unit 166 Including roller bridge and mounting hardware. Suitable for connecting idler to drive unit. Note! Bridges 5115194-5115199 can only be used with plain chain! Bridges, drive unit to idler unit

Transfer units Side transfer, left Side transfer, right Side transfer Side transfer For optional mounting of Idler end unit or Drive unit at the end (A) or (B) XBCPX 180 L Effective track length: 3 m For optional mounting of Idler end unit or Drive unit at the end (A) or (B) XBCPX 180 R Effective track length: 3 m Recommended use when Side transfer is installed with End drive unit H, direct drive, no slip clutch. Transfer units