Conveyor System X180
1 / 10Pages

System information Features Chain travels on four slide rails. Wide track sideflexing safety chain. Compact horizontal and vertical bends. Suitable for soft packages. Examples of application areas Large cardboard boxes, products in soft plastic bags. Examples: detergent powder, wrapped tissue paper rolls, food products, personal care products. System information

Chains X180 Plain chain 3 7 Plain chain Length 3 m *Link kit contains 10 links, 10 pivots, 10 steel pins Friction top chain Length 3 m PAR 1 Friction top chain Length 3 m PAR 2-20 Use the online configurator to specify and order. Friction top link kit * *Link kit contains 10 links, 10 pivots, 10 steel pins Roller cleat link 3 175 Roller cleat link Roller cleat chain must be ordered as plain chain plus desired number of roller cleat links. Cannot be ordered as chain. Other chains See the Chain guide for a selection of other chains. Chain installation See Appendix C, page 471, for...

Plastic pivot Pin insertion tool for chain Each kit contains 25 items. X65P Pin insertion tool Steel pin -X180-X300 kit *This tool is recommended for frequent users Each kit contains 25 items. Beam section Beam (outer section) Beam section (assembled) Length 3 m (3000 ±5 mm) XBCB 3A180 Length to order (500- 3000 mm) XBCB LA180 Slide rail: see page 273 Beam (outer section) Length 3 m (3030 ±5 mm) XBCB 3A H Length to order (500- 3000 mm) XBCB LA H Beam (mid-section) Profile for split conveyor beam (inner section) 85 XF Beam (mid-section) Length 3 m (3030 ±5 mm) XBCB 3A85 Length to order (500-...

Beam components X180 (continued) Mounting tool for clip kit Clip kit for outer beam sections Snap-fit clip kit for outer beam sections Each kit contains two clips. For construction of 182 mm wide beam sections. Mounting tool: see below. Maximum distance between clips is 0,5 m. Mounting tool for aluminium clip kit XBCE 40 3923518 Beam section for chain installation Beam clip assembly Beam section for chain installation Including connecting strips and screws 42 Beam clip assembly Including M8 screw and locking nut. Use minimum 5 clips per meter. Place clips 100 mm from each end. Note. Must be...

Plastic slide rail for X180/X300 beam Plastic screws for slide rail Slide rail Length 25 m HDPE (Black) PA-PE (Grey) PVDF (Natural white) XS XBCR 25 XBCR 25 H XBCR 25 P See Appendix A, page 461 for selection guidelines and assembly instructions. Plastic screws 5 mm for XS-X65-X85XH-X180-X300 beams XLAG 5 See mounting instruction “Anchoring slide rail using plastic screws” on page 466 Note. Must be ordered in multiples of 50 Plastic slide rail for X180/X300 beam, outer Drill fixture for slide rail Slide rail, outer UHMW-PE (μ=0,1–0,25) (White) Length 3 m Drill fixture for...

Drive and idler units – introduction Drive unit types The X180 system includes direct driven units with or without slip clutch. Available motors include variable speed types (V) as well as fixed speed motors (F). End drive units Size Direct drive, no slip clutch Direct drive, slip clutch Heavy, guided Motor specifications Motors are available for 230/400 V, 50 Hz and 230/460 V or 330/575 V, 60 Hz. All motors can be connected for delta or star configuration by means of jumpers. Variable speed motors are SEW Movimot, 380–500 V. Note that variable speed motors include a control box that adds...

End drive units X180, direct drive, no slip clutch End drive units X180, direct drive, slip clutch End drive unit, direct drive 80 End drive unit, direct drive, slip clutch 74 End drive unit, direct drive Fixed speed up to 60 m/min Variable speed up to 80 m/min Motor on left side Fixed/variable speed * Without motor Motor on right side Fixed/variable speed * Without motor XBEB A180 XBEB 0A180HNLP XBEB A180 XBEB 0A180HNRP Maximum traction force: 1250 N. See page 23. Effective track length: 0,80 m *Use online configurator when ordering. End drive unit, direct drive Fixed speed up to 60 m/min...

End drive units X180, direct drive, slip clutch, guided End drive unit H, guided chain, slip clutch 80 End drive units X180, direct drive, no slip clutch, guided End drive unit H, guided chain, no slip clutch End drive unit Direct drive with guided chain. Adjustable slip clutch. Maximum traction force: up to 1250 N. Fixed speeds up to 60 m/min. Variable speed up to 80 m/min. Motor on left side: Fixed/variable speed * Without motor End drive unit Direct drive with guided chain. No slip clutch. Maximum traction force: up to 1250 N. Fixed speeds up to 60 m/min. Variable speed up to 80 m/min....

Protective cover for idler end unit XBEJ A180 Protective cover for idler end unit Effective track length: 0,80 m XBBP 30A180R5 XBBP 30A180R7 XBBP 30A180R10 XBBP 45A180R5 CS XBBP 45A180R7 XBBP 45A180R10 Effective track lengths: R500: 1,35 m (top+bottom) R700: 1,55 m (top+bottom) R1000: 1,85 m (top+bottom) Effective track lengths: R500: 1,60 m (top+bottom) R700: 1,90 m (top+bottom) R1000: 2,40 m (top+bottom) FST Plain bend, 60°±1° R=500±10 mm R=700±10 mm R=1000±10 mm Effective track lengths: R500: 1,85 m (top+bottom) R700: 2,30 m (top+bottom) R1000: 2,90 m (top+bottom) XBBP 60A180R5 XBBP...

Vertical bends X180 Vertical bend, 5° 80 Four outer section beam pieces, unassembled. Effective track length: 0,50 m (top+bottom) Four outer section beam pieces, unassembled. Effective track length: 0,75 m (top+bottom) Four outer section beam pieces, unassembled. Effective track length: 1,5 m (top+bottom)