Conveyor System WL
16Pages

Modular plastic belt conveyor WL System information Wide conveyor for transport and accumulation Typical applications The WL conveyor system offers many of the benefits of the original FlexLink conveyor system. The added advantage of a wide belt (up to 600 mm) permits effective transport and accumulation in several different configurations. Many accessory components of the original FlexLink system will fit, including guide rail components and supports. Most components are attached by means of T-slot fasteners, ensuring maximum flexibility. Nothing is welded. Only a minimum of cutting and drilling will be required to install a conveyor and have it running. The WL conveyor system is designed for transport and accumulation of lightweight goods such as: Secondary packaging of food and hygiene products Card board boxes Plastic containers Shrink wrapped products CTL 40 m/min 15 m up to 30 kg up to 250 kg 1,5 kg/slide rail 1000 N 1200 N System information

Conveyor sections The modular plastic belt conveyor in three widths – 322, 424 and 626 mm – can be built as straight sections or in S, U or L-shape with 30, 45, 60 or 90° horizontal bend, or combinations thereof. Vertical bends are available in 5° and 15°. Note! A combination of horizontal and vertical curves are not recommended. Conveyor sections

Belts – introduction PO Technical characteristics Belt width Belt weight (Polypropylene) Belt weight (Acetal) Belt pitch Max. permissible belt tension With bend Without bend Max. permissible belt tension for Friction top belt With bend 700 N Without bend 1000 N Temperature range (Polypropylene) Temperature range (Acetal) Links and plastic rods The belt consists of plastic hinge-type links connected by plastic rods. The belt is woven together by 102 mm,124 mm and 180 mm wide links. The assembled belt forms a wide, flat and tight conveyor surface. Three standard widths of belt can be...

Accessories for use with Friction top belt Plain belt Plain belt Length 1 m Acetal 304 mm wide, WL322 406 mm wide, WL424 608 mm wide, WL626 WLTP 1A304 H WLTP 1A406 H WLTP 1A608 H Roller kit, centre belt support wheel/roller Kit for Friction top belt WLTP 1A608 F, includes mounting hardware. Friction top belt Length 1 m Polypropylene 304 mm wide, WL322 406 mm wide, WL424 608 mm wide, WL626 WLTP 1A304 FA WLTP 1A406 FA WLTP 1A608 FA Friction top belt increases the friction between product and chain and can often be used for 20° slopes. Note! Can only be used in straight sections and in...

Conveyor frame components – introduction Conveyor frame sections are built from the following components: Minimum conveyor length Straight section Beam for cross bar Fastener yoke Mounting hardware Minimum conveyor length L-shape section Minimum conveyor length U-shape section L1 L2 R Minimum conveyor length S-shape section L1 L2 Conveyor dimensions Each 3 m frame section consists of two frame profiles connected by four cross bars. The conveyor chain slides on the top edges of the frame profiles, and returns on the bottom side. Plastic slide rails ensure a low friction contact between chain...

Conveyor frame components Conveyor frame profile Centre support profile 24,5 Centre support profile Length 3 m (3000 ±2 mm) Length to order (30- 3000 mm) Connecting strips for beam 160 Frame profile Length 3 m (3000 ±2 mm) Length to order (30- 3000 mm) Conveyor beam Connecting strip Conveyor beam, WL322 Length 3 m (3000 ±2 mm) Length to order (500- 3000 mm) Conveyor beam, WL424 Length 3 m (3000 ±2 mm) Length to order (500- 3000 mm) Conveyor beam, WL626 Length 3 m (3000 ±2 mm) Length to order (500- 3000 mm) WLCB 3A322 WLCB LA322 WLCB 3A424 WLCB LA424 Mounting: One each of MC6S 6×14, BRB...

Conveyor frame components (continued) Support rail Support rail, length 25 m PA-PE (Grey) Fastener yoke Beam 30 mm × 30 mm Aluminium, anodized Length 3 m Length to order Beam section for belt installation Fastener yoke Steel, electro-zinc-plated Length 30 mm WLAF 30 Beam section kit WL322 WL424 WL626 WLCC 322 WLCC 424 WLCC 626 Including connection strips and screws Slide rail Slide rail Spacer beam 30 mm × 30 mm Length 279 mm Length 381 mm Length 583 mm Slide rail, length 25 m PA-PE (Grey) PA-PE (Grey) Mounting tool for slide rail Mounting tool for slide rail Slide rail

Drive units – introduction Ordering information Drive units with motors must be specified using the webbased configurator. The configurator provides detailed information and step-by-step guidance in the specification process. A product code string is generated, containing the specification details. See next page for examples of code strings. Drive units without motors can be ordered using the designations in the catalogue. • Connecting strips are included with the drive units. Slide rail must be ordered separately. Dimension drawings in catalogue Drive unit types The WL system includes...

End drive units, direct drive, no slip clutch End drive unit L/R, WL322 End drive unit Fixed/variable speed* Without motor: Transmission on left side Transmission on right side WLEB A322 WLEB 0A322NLP WLEB 0A322NRP * Use online configurator when ordering Effective track length: 0,80 m End drive unit Fixed/variable speed* Without motor: Transmission on left side Transmission on right side * Use online configurator when ordering Effective track length: 0,80 m XD ELV End drive unit Fixed/variable speed* Without motor: Transmission on left side Transmission on right side * Use online...

End drive units, direct drive with slip clutch End drive unit L/R with slip clutch, WL322 End drive unit L/R with slip clutch, WL626 End drive unit Fixed/variable speed* Without motor: Transmission on left side Transmission on right side WLEB A322 WLEB 0A322LP WLEB 0A322RP * Use online configurator when ordering Effective track length: 0,80 m End drive unit L/R with slip clutch, WL424 End drive unit Fixed/variable speed* Without motor: Transmission on left side Transmission on right side * Use online configurator when ordering Effective track length: 0,80 m End drive unit Fixed/variable...