Catalogs >
Flexitallic >
Sigma 511

Sigma 511
2Pages

Catalog excerpts

FLEXITALLIC SIGMA 511 FLEXITALLIC LIMITED PO BOX 3, MARSH WORKS, DEWSBURY ROAD CLECKHEATON, WEST YORKSHIRE BD19 5BT TEL: 01274 851273 FAX: 01274 851386 PRODUCT REFERENCE: FLEXITALLIC SIGMA 511 DESCRIPTION: SIGMA 511 is a high performance biaxially orientated sheet sealing material containing PTFE with silica filler. COLOUR: Pink SERVICE: Suitable for sealing all chemicals across the whole pH range (0-14) with the exception of molten alkali metals, fluorine gas, hydrogen fluoride or materials which may generate these. Maximum recommended temperature: 260OC (500OF) Maximum recommended pressure: 8.5 MPa (85 bar; 1235 psi) These temperature and pressure guides cannot necessarily be used simultaneously and may not apply at all thicknesses. Complies with the requirements of FDA regulations. WRAS approved for use with potable water: Approval No. 030511 Do NOT use gasket pastes. TYPICAL PHYSICAL PROPERTIES: Thickness Density ASTM Compressibility ASTM Recovery ASTM Tensile Strength DIN Residual Stress @ 175OC DIN Gas Permeability ASTM Liquid Leakage; Fuel A 50 psi ASTM Creep Relaxation mm gcm-3 % % MPa MPa mL/min mL/hr % 0.8 2.2 10 44 15 42 <0.1 3 24 1.5 2.2 7 44 16 30 <0.1 4 35 2.0 2.2 8 42 16 25 <0.1 4 43 3.0 2.2 7 45 15 20 <0.1 3 53 AVAILABILITY: Sheet size: 2.0 m x 2.0 m For larger sizes, welded gaskets are available. Thickness range: 0.75 mm to 3.2 mm Other thicknesses may be available on request. PDS 124 07/07 This Data Sheet refers to the material as supplied. The information contained herein is given in good faith, but no liability will be accepted by the Company in relation to same. We reserve the right to change the details given on this Data Sheet as additional information is acquired. Customers requiring the latest version of this Data Sheet should contact our Applications Engineering Department. The information given and, in particular, any parameters, should be used for guidance purposes only. The Company does not give any warranty that the product will be suitable for the use intended by the customer.

Open the catalog to page 1

HEALTH AND SAFETY Because of the processes which take place during manufacture, the product is believed to present no health and safety hazard and, under normal handling and use it is unlikely that the product will give rise to significant levels of exposure to constituent materials. SIGMA 511 contains PTFE and silica. Under harsh mechanical treatment (e.g. high speed stamping operations or abrasion) the constituents may give rise to irritant dusts which, in extreme cases of exposure, could lead to more serious respiratory problems. Occupational exposure to such dusts should therefore be...

Open the catalog to page 2

Sigma 511 2Pages

Catalog excerpts

All Flexitallic catalogs and technical brochures

Sigma 511
2Pages