FLEXITALLIC AF2100 FLEXITALLIC LIMITED PO BOX 3 MARSH WORKS DEWSBURY ROAD CLECKHEATON WEST YORKSHIRE BD19 5BT TEL: 01274 851273 FAX: 01274 851386 PRODUCT REFERENCE: FLEXITALLIC AF 2100 DESCRIPTION: AF 2100 is a high performance nitrile rubber based sheet sealing material reinforced with glass fibre. COLOUR: Blue SERVICE: AF 2100 is suitable for sealing in a wide range of applications involving steam, water, oils, fuels, mild acids and alkalis. Maximum recommended temperature : 475OC (887OF) Maximum recommended pressure : 14 MPa (140 bar; 2030 psi) These temperature and pressure guides cannot necessarily be used simultaneously and may not apply at all thicknesses. Do NOT use gasket pastes. The higher compressibility of AF 2100 compared to CAF combined with the comparative effects of thickness on residual stress means that AF 2100 should be used at lower thicknesses. It is recommended that 1.0 mm AF 2100 be used in place of 1.5 mm CAF. TYPICAL PHYSICAL PROPERTIES: Thickness 1.0 mm Density gcm-3 ASTM Compressibility % ASTM Recovery % BS Residual Stress MPa DIN Gas Permeability mL/min ASTM Oil Thickness Increase % ASTM Fuel B Thickness Increase % ASTM Oil 3 Weight Increase % ASTM Fuel B Weight Increase % 1.60 18 68 27 0.03 5 10 18 19 AVAILABILITY: Sheet size: 1.5 m x 1.5 m Thickness range: 0.4 mm to 2.0 mm For applications in which a thickness greater than 2 mm is essential SF 3300 is recommended. Also available with SARK III release coating on both sides. PDS 232 04/99 This Data Sheet relates to the material as supplied. The information contained herein is given in good faith, but no liability will be accepted by the Company in relation to same. The acquisition of additional information may necessitate revision to parts, or all, of this Data Sheet, and such information will be supplied as it becomes available. The information given and, in particular, any parameters, should be used for guidance purposes only. The Company does not give any warranty that the product will be suitable for the use intended by the Customer.

HEALTH AND SAFETY Because of the binding processes which take place during manufacture, the product is believed to present no health and safety hazard and, under normal handling and use it is unlikely that the product will give rise to significant levels of exposure to constituent materials. FLEXITALLIC AF 2100 is reinforced with glass fibres based on continuous filaments of controlled diameter well above the size recognised as respirable. Consequently this material contains NO RESIRABLE FIBRE. Under harsh mechanical treatment (e.g. high speed stamping operations or abrasion) or if the product...