Catalogs >
FLEXIM Flexible Industriemesstechnik GmbH >
FLUXUS F808 - Non-intrusive Ultrasonic Clamp-on Flow Measurement for Hazardous Areas

FLUXUS F808 - Non-intrusive Ultrasonic Clamp-on Flow Measurement for Hazardous Areas
4Pages

Catalog excerpts

FLUXUS F808 - Non-intrusive Ultrasonic Clamp-on Flow Measurement for Hazardous Areas - 1

Non-intrusive Ultrasonic Clamp-on Flow Measurement for Hazardous Areas FLUXUS F808 FM Class I, Division 1 Certified E&P - Offshore ______ E&P - Onshore ______ Midstream Hydrocarbon Transport ______ Downstream - Refining ______ Petrochemical Industries ______ Chemical Industries

Open the catalog to page 1

FLUXUS F808 - Non-intrusive Ultrasonic Clamp-on Flow Measurement for Hazardous Areas - 2

Specifically Designed for Demanding Environments From Crude Extraction and Production to Petrochemical and Chemical Processing From wellhead to refinery, the flows of crude oil and refined products need to be measured every step of the way. Harsh environments with corrosive atmospheres offshore or hot and dirty applications during crude oil refining require tough solutions. Also during chemical processing, media such as acids, caustics or highly viscous organic substances place enormous material and mechanical stress upon wetted flow measurement technologies. FLEXIM offers the better...

Open the catalog to page 2

FLUXUS F808 - Non-intrusive Ultrasonic Clamp-on Flow Measurement for Hazardous Areas - 3

FLUXUS F808 - FM Class I, Div. 1 certified - Bi-directional flow measurement over a wide turndown ratio With the FLUXUS F808, FLEXIM moves one step further and presents its first clamp-on solution for applications requiring FM Class I, Division 1 certification. - Very cost effective: No pipe works No process shut-downs Virtually maintenance-free The rugged FLUXUS F808 with its flameproof housing and stainless steel (SS316 optional) seawater resistant transducers is suited for every industrial application – not only offshore. With the connection and electronic compartment being hermetically...

Open the catalog to page 3

FLUXUS F808 - Non-intrusive Ultrasonic Clamp-on Flow Measurement for Hazardous Areas - 4

FLEXIM FLUXUS F808 - FM Class I, Division 1 Technical Data FLEXIM AMERICAS Corporation Non-intrusive ultrasonic clamp-on flowmeter for liquids (clamp-on flow measurement according to the transit time difference method - automatic NoiseTrek selection for measurements with high gas or solid content) Operating temperature of the transmitter: Measuring units: volumetric flow rate, mass flow rate, flow velocity Flow velocity range: Temperature range (at pipe wall): Pipe diameter range: ± 0.5% of reading ± 0.03 ft/s with field calibration** ± 1.0% of reading ± 0.03 ft/s with 5-point NIST...

Open the catalog to page 4