FLUXUS F- ultrasonic flowmeters for liquids
16Pages

Liquid Flow Measurement Power Generation District Energy Measuring from outside what's flowing inside

FLUXUS® measures flow non-intrusively using ultrasonic technology. The ultrasonic transducers are simply clamped on to the outside of the pipe and are never in contact with the liquid - pipe work is not necessary. Our non-intrusive clamp-on technology provides for maximum flex- ibility and the sophisticated electronics of FLUXUS® ensure the highest possible accuracy and reliability. The measuring system, consisting of the transmitter, the transducers and the VARIOFIX mounting fixture, can optimally be configured to meet your individual requirements. The FLUXUS® flowmeter series comprises a...

FLEXIM's non-intrusive ultrasonic tech- nology suits an unmatched range of ap- plications. FLUXUS® offers accurate and reliable measurement from the smallest pipes (e.g. 6 mm tubing in paint finishing systems) up to very large large pen- stocks (e.g. flow measurements in hy- droelectric plants). Standard transducers may be used for perature range of the high temp, versions extends this up to 200°C. The patented Wavelnjector® system further extends the measurement range of FLEXIM's standard transducers from cryogenic For nearly every liquid and pipe Measurement is possible on just about...

The advantages of non-intrusive measurement are obvious: since the ultrasonic transducers are simply attached to the outside of the pipe, the measuring equipment is not subject to wear and tear by the media and does not cause any pressure loss. Measurements at maximum operating pressures can be carried out easily with no additional costs. No pipe work is required when set- ting up the measuring point and. as a result, the operation is not -» Simple attachment of the VARIOFIX transducer system to the outside of -» Installation is possible during normal ongoing operation without process...

-» No pressure Loss, thus low operating costs -> Installation without welding or other mechanical work on the pipe -» No extra charge for large pipe diameters -» Precise, hysteresis-free, bi-directional flow measurement with large dynamic range (turndown) -> Long-term stable, drift-free measurement results -> High measuring rate -> Quick response time -» Measurement of even minute flows -» High sensitivity to low flows

"Plug & Play" calibrated transducers Each pair of transducers undergoes a rigorous calibration at the factory and is shipped with traceable calibration documentation. All calibration data (including the transducer identification and parameters) is stored in a transducer-resident non-volatile memory. It is automatically transferred to the transmitter upon connection. Consequently, program- ming errors are eliminated and there is never a need for zero adjustment or calibration. Guaranteed to be user friendly No elaborate instructions are required to use FLUXUS®'s intuitively structured menus....

General Technical Data Measuring principle: Transit time difference correlation principle Volume flow, mass flow, flow velocity, thermal energy flow (when temperature inputs are installed) Flow velocity: - with standard calibration: ± 1.6 % of reading ± 0.01 m/s - with extended calibration (option): ± 1.2 % of reading ± 0.01 m/s - with field calibration**: ± 0.5 % of reading ± 0.01 m/s Gaseous and solid content: * for measurement acc. to transit time difference principle, under reference conditions and at v > 0.15 m/s Measuring principle The Transit Time Difference Correlation Principle...

Industry Hardened. ALL FLEXIM cLamp-on transducers are watertight and suitable for use in harsh industrial environments. The robust stainless steel construction and the rugged integrated cables guarantee reliable measurement results over long periods of extensive use. Almost all transducer types are available in explosion-protected and IP68 submersible versions. Robust transducer mounting Be it for quick and easy mounting of a short-term measurement solution or for a permanent installation, for large pipes or for small tubes: FLEXIM offers you transducer mounting fixtures for every The...

General Technical Data of the Transducers Operating temperature, standard transducers: -40°C to +130°C Operating temperature. high temperature transducers: Operating temperature with Wavelnjector®: Stainless steel or PEEK with stainless steel protective cap (stainless steel SS316 optional) Hazardous area classification: FM Class I Div II and ATEX Zone 1 & 2 types available (FMUS and FMC and GOST)

Portable, quick and reliable. Unmatched in performance, this flexible and easy to use flow meter is the ideal tool for the support of service and maintenance activities. It can also be used for the control or even for the temporary replacement of permanently installed meters. The wide pipe diameter range of each transduc- er type is one of its greatest assets: two pairs of transducers are sufficient to cover the most com- mon pipe diameter ranges. In addition, its optional thermal energy measure- ment capability makes it possible to carry out a complete analysis of thermal energy usage in...

ardous areas, the highly rugged FLUXUS® F608 avoids the need thus the system of choice for temporary measurement tasks -» Chemical Industry -» Petrochemical Industry -» as well as in Power plants Food and beverage industry -» Consumption optimization Chemical industry -» Portable flow controls at start-up and/or inspection of facilities -» Helpful tool for facility optimization -» Flow measurement of heat transfer media wastewater services -» Leakage control -» Treatment dosage control -» Flow control in water supply semiconductor industry -» Non-invasive measurement of ultra pure fluids,...

Permanently installed, freely configurable. The FLUXUS® ADM 7X07 is designed for permanent installation. With one or two flow channels and ver- satile electrical inputs and outputs, it can be opti- mally configured for your measuring application. A variety of process parameters can be measured Due to its robust, metal field housing, the ADM 7407 is suitable for outdoor use. Although technically identical, the FLUXUS® ADM 7907 is designed for permanent installation in 19" rack systems. Chemical industry -» Measurement of corrosive or toxic media, for example in the chlorine -» Measurement of...