NOVITOOL® AMIGO™ * Splice Press for Monolithic Belts Engineered for Precision Belt Splicing Splices in monolithic belting must ensure tight pitch tolerance and be free from pinhole air pockets. Everything about the Amigo™ has been designed to do just that. And in typical Novitool® design, it was made to do it with ease, safety, and speed. Custom templates secure the belt when cut to ensure accurate pitch control. Then the contactless heating process splices the belt in less than one minute and finishes with a controlled amount of clash. To ensure quality splices, pinholes are avoided through engineered solutions such as the pre-heat function to remove moisture from the belt ends; the shielded heat zone for consistent heating in various environmental conditions; and the contactless heating method. Accuracy, speed, and operator safety are fully integrated into the Amigo design making it an ideal splicing tool for in-shop or on-site splicing. Contactless Heating provides for a controlled amount of clash without actual contact with the heat source Integrated Belt Cutter maintains accurate pitch in a single pass Shielded Heat Zone and Temperature Control ensures splice parameter consistency regardless of ambient temperatures Interchangeable Splice Templates for precise pitch splicing of belts from various belt manufacturers Digital Time Control with quick, simple splice settings; the Pre-Heat Setting can be used to remove moisture and avoid pinholes *Patent 8,770,253 B2, other patents pending www.flexco.com www.flexco.com Operates on Single Phase 115V or 230V Custom Transport Case for easy storage and transportation

Safety Features of the Amigo™ NOVITOOL® AMIGO™ Splice Press for Monolithic Belts Amigo™ Press and Cable Ordering Information Ordering Number Item Code 115 volt; single phase; 15 amp 230 volt; single phase; 7.5 amp Integrated Cutter: Operator is protected from blade during single pass cutting operation. NOTE: Press, cable, and templates are all purchased separately. Amigo™ Template Ordering Information Belt Manufacturer Templates Intralox® Cutter Storage Position: Cutter must be in storage position for splicing function to operate. Belt Style ThermoDrive® SuperDrive™ DualDrive Habasit Cog-veyor...