MOTORIZED BRUSH CLEANER Effective Cleaning Solution for Chevron, Cleated and Raised-rib Belts Chevron, cleated and raised-rib belts present a special problem for efficient cleaning. The Motorized Brush Cleaner is an ideal option for cleaning these belts. It also performs well as the second or third cleaner in a system with worn or pitted belts, as the bristles effectively dislodge trapped material. Adjusting brackets allow easy retensioning of brush to belt as bristles wear Uniquely patterned polypropylene bristles reduce material buildup 180 RPM Gear Motor 1 or 2 HP motor (depending on belt width) with IP66 sealed option Features and Benefits • Maximum Cleaning. Spins opposite the belt direction for optimal cleaning. • Uniquely patterned bristles. Aids in reducing material buildup and clogging. • Adjustable tensioners. Allows easy brush-to-belt adjustment as the bristles wear. • Works on mechanically spliced or vulcanized belts. www.flexco.com www.flexc

MOTORIZED BRUSH CLEANER Specifications and Guidelines • Motor Ingress Protection IP55 or IP66 • Available for Belt Widths 18" to 84" (450 to 2100mm) • Horizontal Clearance Required 12" (305mm) • Vertical Clearance Required 12" (305mm) • Shaft Diameter 1-7/16" (36.5mm) • Shaft Length Belt Width + 42" (1067mm) • Maximum Chevron or Cleat Height 1/2" (13mm) • Motor Voltage and HP 208-230/460VAC 3 Phase* 1HP (Cleaners 18-42" (450-1050mm)) 2HP (Cleaners 48-84" (1200-2100mm)) 575V 3 Phase* 1HP (Cleaners 18-36" (450-900mm)) 2HP (Cleaners 42-84" (1050-2100mm)) *other motors available upon request • Maximum...