Catalogs >
FLEXCO >
Bolt Hinged Fastener System

Bolt Hinged Fastener System
4Pages

Catalog excerpts

Bolt Hinged Fastener System Ideal for Applications that Use Smaller Pulleys, but Still Require a High-Strength, Dependable Splice. Sturdy hinged construction makes Flexco® Bolt Hinged fasteners ideal. A choice of sizes accommodate belts from 6 mm (1/4”) to 16 mm (5/8”) thick. Versatile, easy-to-install design For belt conveyor applications subject to frequent length adjustments, the Bolt Hinged fastener is easy to install – and re-install. The joint can be separated simply by removing the hinge pin. On-site installation requires hand or power tools. Our exclusive piloted bolt also simplifies installation and holds fastener plates firmly in place. For added strength and pull-out resistance, specially formed teeth penetrate deep into the belt carcass without damaging carcass fibers. Market Applications: • Construction and Road Equipment • Coal • Salt • Potash • Grain • Wood Products • Recycling Exclusive tapered tip cradles nuts securely in place. Easy to use. Reduces installation time. Bolt Hinged Fastener Selection Guide Fastener Size Belt Thickness Range For Belts with Mechanical Fastener Ratings Up To: Recommended Minimum Pulley Diameter (Operating Tension 75%-100% of Belt Rating)

Open the catalog to page 1

Bolt Hinged Fastener System “J” Carton Complete Fastener Joint Each “J” carton includes one complete belt joint for belt widths from 300 mm (12”) to 1500 mm (60”). Each carton includes: • 2 Fastener Strips • 1 Gauge Pin • 1 Hinge Pin • 2 Hinge Pin Washers • Filler Tubing • Required Piloted Bolts, Nuts, and Clips Ordering Information Belt Width 375X Fasteners Ordering Number NCS Steel Joint SC Steel Joint with Nylon Covered with Bare Stainless Cable * Steel Cable * NC Steel Joint with NylonCovered Steel Cable * SSC Stainless Joint with Bare Stainless Cable ** 375XSJ24SSC 375XSJ30SSC * “J”...

Open the catalog to page 2

Bolt Hinged Fastener System Ordering Information Belt Width NC (1/4” dia.) Nylon Covered Steel Cable Each Package (One Pin) (Ten Pins) Extra Hinge Pins for 375X and 550 Ordering Number NC (1/4” dia.) SC (1⁄4” dia.) Nylon Covered Bare Steel Cable Steel Cable* Each Package Each Package (One Pin) (Ten Pins) (One Pin) (Ten Pins) SSC (7/32” dia.) Bare Stainless Cable* Each (One Pin) NC – Nylon Covered Steel Cable SC – Bare Steel Cable Nylon covering reduces corrosion and simplifies hinge pin insertion. Recommended for abrasive or gritty material conveyance. NCS – Nylon Covered Stainless Steel...

Open the catalog to page 3

Bolt Hinged Installation Tools and Supplies The only tools needed for Bolt Hinged fastener installation are the portable hand tools or power tools and the Flexco® Bolt Hinged Curved Templet described here. Ordering Information Hand Installation Tools For Fastener Description Number Ordering Number * For use with Steel No. 375X or Steel No. 550 nuts. ** For use with Stainless No. 375X or Stainless No. 550 nuts. Ordering Information Power Installation Tools For Fastener Description Number Ordering Number Power Punch Power Wrench Quick Change Chuck * For use with Steel No. 375X or Steel No....

Open the catalog to page 4