ALLIGATOR® Belt Lacing System For Easy, Economical Installation of a Low Prole Belt Splice Alligator® Lacing is available in continuous lengths to fit any belt width and provides uniform tension across the full belt width. The one-piece fastener strip also ensures that there are no loose pieces to work themselves out of the belt and into the conveyed product. Designed for belts from 1/32” to 1/2” ( .8 mm to 12.5 mm)*, Alligator Belt Lacing installation requires no special tools, only a hammer. The lacing is secured with teeth that embed lengthwise on the belt, providing a strong, vise-like hold. Clips hold gauge rod and lacing firmly and squarely against the belt during the installation process to ensure a strong, straight splice. The straight splice also helps ease hinge pin insertion. Market applications • Package and Parts Conveying • Food and Sanitary Contact • Agricultural Harvesting and Handling • Recycling and Scrap Handling • Wood Products Alligator® Conveyor Belt Lacing Selection Chart Lacing Size For Belts With Mechanical Fastener Rating Up To: P.I.W. kN/m Belt Thickness Range in. Recommended Minimum Pulley Diameter in. mm Approx. Corrugated Hinge Pin Diameter in. mm * Alligator Belt Lacing can operate over pulleys as small as 1” (25 mm) in diameter, or on belts with mechanical fastener ratings to 200 P.I.W. (35 kN/m). www.exco.com www.exco.com

ALLIGATOR® Belt Lacing System Conveyor Belt Lacing For flat conveyor belts from 12” (300 mm) to 60” (1500 mm) wide and for belts 1/32” to ½” (.8 to 13 mm) thick, use conveyor belt lacing sized No. 00 to No. 65. Alligator® Conveyor Belt Lacing is available in steel or stainless steel with corrugated hinge pins furnished as standard. Steel Steel is suitable for most applications and is plated for rust and corrosion resistance. 300 Series Stainless Steel 300 Series stainless steel is non-rusting and displays extra resistance to abrasion, acids, chemicals, and magnetic attraction. It is excellent...

ALLIGATOR® Belt Lacing System Transmission Belt Lacing For flat power-transmission belts up to 12” (300 mm) wide, Alligator® Transmission Belt Lacing is available for sizes 00 through 65. Lacing is scored so it can be easily trimmed to fit narrower belts. Corrugated hinge pins are furnished with the three smallest lacing sizes. A two-piece Rocker Hinge pin is available for sizes 15 to 65. Steel Steel is suitable for most applications and is plated for rust and corrosion resistance. 300 Series Stainless Steel 300 Series stainless steel is non-rusting and displays extra resistance to abrasion,...

ALLIGATOR® Belt Lacing System Belt Preparation Tools 900 Series* Belt Cutter 900 Series* Belt Cutter 900 Series* Belt Cutter The 900 Series Belt Cutter incorporates numerous features for easy, smooth cutting of belts with extreme accuracy. Ordering Number • Quick belt clamp feature • Durable blade design that produces highly accurate cuts while being fully enclosed for safety * Patent pending • Cuts belts up to 1-1/2” (38 mm) 845LD Belt Cutter 845LD Series Belt Cutter A sturdy, safe, simple, and portable tool specially designed for cutting wide belts. Ordering Number • Cuts belts up to 1/2” (12...