FLEXBALL CABLES The Flexball cable, recognizable from the green colour of the plastic cover, is an extremely flexible and sliding cable. It has a very reliable and robust construction which guarantees very high performances. If mounted properly, it will last “for ever” Conduit Render External blade Central blade Sphere Ball guide It can operate in severe environmental conditions such as moisture, condensation or icing, without impact on perIt’s efficiency is highly better than any traditional push-pull cable. The Flexball cable maintains high mechanical efficiency and very low backlash which approaches to zero, even in complex routings and difficult installations. Flexball cable can be spatially laid on all the three dimensions with low bending radii and 97% efficiency, also under heavy loads. It works reliably and without interruption, even at lengths formance. For standard cables the working temperature is 108 °C but special cable versions can work up to 200 °C degrees. It can transfer linear movements with a stroke up to 300 mm. The ball-bearing principle enables a smooth movement, low play and delay-free transfer of loads which can reach 15000 N in push and 25000 N in pull operation mode. over 60 meters. No maintenance or lubrication is necessary. It is indifferent to changes of temperature.

CONSTRUCTION Ball bearing controls have an inner blade which is held between two rows of ball bearings by two outer blades, and all is contained in a high strength outer casing. Stainless steel inner components guarantee an optimal lifetime with high fatigue resistance in any working condition. Terminal and end fittings can be made of steel, stainless steel or brass. APPLICATION Ball bearing controls are generally used in applications with long routings and high tension and compression. The Flexball cable is manufactured in lengths ready to install. It replaces complex solid rods, hydraulic,...

PRODUCT RANGE The Flexball cable is available in different sizes, from type 55 which has a conduit diameter of 9.5 mm, to type 160 that has a conduit diameter of 24.3 mm. The Flexball cables are available with several types of end fittings to fit the different application requirements. End fitting with rack (shown completelly pulled out) Available for type 70 and 95 G L Standard end fitting (shown completelly pulled out) Available for type 70, 95 and 125 Stroke L T shape end fitting (special application) Available for type 70 L G shape end fitting (marine application) Available for type 70 I...

STANDARD FLEXBALL END FITTING DIMENSIONS Cable type AN: standard cable coating  ACP: reinforced cable coating  Flexball Italiana S.r.l. Via San Luigi 13/A - 10043 Orbassano (To) - Italy Tel 0039.011 90.38.900 - Fax 0039.011 90.38.747 [email protected] www.flexballitaliana.com Cable’s elongation (mm): Cable’s length (m) x Applied Load (N) x Ec x 0.01